All jobs within 400 km around Montréal

JOB SUMMARY

Facilities Maintenance & Support Branch delivers engineering programs and support services to the Infrastructure & Water Services Department, including developing the corporate Asset Management strategy for water and wastewater treatment plants, pumping stations, reservoirs and facilities, capital project management services (facility and network), lifecycle performance optimization, energy efficiency and energy management initiatives, and efficiency improvements for water, wastewater, stormwater and solid waste programs.

You are responsible for providing reliability engineering expertise in specific areas, such as Electrical/Instrumentation disciplines, relating to work involving either facilities or network assets.  You identify and resolve asset reliability risks that could adversely affect plant, facility, linear systems or equipment operations, including condition assessment, failure elimination, risk management and life cycle asset management. You also contribute to the continuous improvement of asset/equipment reliability through sourcing condition assessment and maintenance best practices, providing training, and recommending preventive, predictive and basic equipment care practices.  

Facilities may include:

• For drinking water and waste water: Treatment plants, pumping stations, tanks, structure and force mains assets
• For solid waste: Landfill site(s) or transfer station assets
• Programs focus on multidiscipline predictive, preventive and corrective maintenance support.

Networks may include:

• For drinking water and waste water: large diameter water mains, sanitary and storm sewers and collectors
• For surface water: storm ponds, open channel drainage systems
• Programs focus on condition assessment and maintenance program optimization provisions and system capacity management.

In addition, you: provide implementation management and coordination condition (predictive maintenance) assessment and maintenance support, and root cause analysis of equipment failures; and conduct needs analysis and assist in the development of annual and longer term rehabilitation programs for projects through the coordination of research data, compilation and analysis of information on existing infrastructure, and prioritization of rehabilitation needs.

EDUCATION AND EXPERIENCE

Completion of 4 year university degree in Engineering or Applied Science in Electrical, Mechanical, Civil or Municipal Engineering (as required for specific facility or network work location) 

Minimum of 5 years of related, progressively responsible experience in a relevant municipal engineering environment applying the principles and practices of reliability engineering, including experience with Condition Based Monitoring programs, non-destructive testing and other predictive technologies, diagnosis/resolution of technically advanced problems and the management of external consultants

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• Corporate, departmental and branch policies and procedures
• Federal, provincial and municipal legislation, and municipal engineering standards, pertaining to water quality, potable water, sanitary, wastewater, and storm water services
• Federal and provincial government legislation and regulatory requirements governing environmental issues and assessments, building/electrical/fire codes, and safety
• The City’s environmental services infrastructure and system components, including design, construction operations and performance
• General theory and principles of Infrastructure Asset Management approaches pertaining to equipment level of service and criticality, root cause analysis, maintenance management strategies, and use of applicable condition assessment and predictive maintenance practices (PdM’s)
• Electrical, Mechanical and Civil engineering  planning, design, construction/rehabilitation/maintenance related to the work 
• Infrastructure management systems, digital inventories and schematic mapping to determine data requirements, feasibility and architecture to manage the inventory
• Computerized Maintenance Management Software–SAP and Maximo and the integration of data information from SCADA Systems
• CADD, GIS and Microstation
• Principles of project management 
• Confined Space and working-at-heights requirements
• Research, surveying and data gathering and analysis techniques
• Knowledge of applicable health and safety legislation, including the rights and duties of workers.

For Mechanical work:

• Maintenance and operation of various mechanical equipment associated with drinking and waste water facilities
• TSSA Regulations & Codes including CSA B51, Boilers & Pressure Vessel Ontario Regulations 220/01 & TSSA Owner User Programs
• Welding & Brazing procedures, possible faults & material selection
• ASME Piping Codes B31.1, B31.3 & B31.5
• Failure Mechanisms of Storage Tanks & Piping Systems
• Testing, monitoring & repair programs such as Pressure Relief Valves, noise/thermographic/vibrational/Oil Analysis, Hose Inspection Program & Lifting Devices 
• TSSA Boilers and Pressure Vessels (BPV) Safety Program & the City of Ottawa Design Standards 
• Mechanical assembly diagrams

For Electrical work:

• Energy management issues to advise on energy savings and forecast energy needs
• High and low power distribution, generation, motor control and process, switchgear motor starters, instrumentation systems and related maintenance, installation, testing and repair procedures
• National and local electrical codes and standards
• Information systems techniques and practices
• Maintenance and operation of electrical, instrumentation, and SCADA systems
• Electrical and electronic wiring diagrams

For Civil (Facilities/Structural) disciplines:

• Failure mechanisms of concrete structures and structural steel tanks including API 650 designated tanks
• Failure mode analysis and remaining service life of concrete structures and knowledge of various repair methods
• Maintenance and operation of water distribution and wastewater systems
• Condition assessment theory, practices and technologies associated with water distribution and wastewater systems
• Repair, rehabilitation and replacement approaches and methodologies
• Various coating systems, membrane technology and expansion joint sealing technology
• Mechanical design to include pump base and pipe support design

COMPETENCIES, SKILLS AND ABILITIES

• Work independently, with minimal direction, and collaboratively with all staff as part of a team
• Able to identify and analyze complex engineering problems and manage multi-disciplinary assignments to develop realistic solutions problems involving design, resources, scheduling, technical and other difficulties
• Able to provide technical leadership to plan, lead, coordinate, implement and manage projects to completion, provide functional supervision to others, and to manage work quality, scheduling and completion 
• Possess organizational skills and flexibility to plan, initiate, organize and prioritize own work, to manage a high volume of projects and to deal effectively with multiple demands, conflicting priorities, pressures and deadlines
• Able to manage contracted work, and foster good working relationships with external contractors in order to achieve Branch objectives 
• Possess computer literacy in applications such as MS Office Suite, ArcMap
• Able to perform data analysis, formulate recommendations, and create and maintain reports 
• Possess strong documentation, report writing and presentation skills
• Able to apply facilitation, negotiation and conflict management skills
• Demonstrate leadership and initiative
• Able to think analytically, and be attentive to accuracy and detail 
• Able to demonstrate sound judgement
• Flexible adaptable and resourceful
• Team oriented  
• Diplomatic, discreet and tactful when dealing with sensitive matters , and contentious issues and situations

JOB SUMMARY

The City of Ottawa has been named one of the National Capital Region’s Top Employers, and one of Canada’s Best Diversity Employer for five consecutive years.  Fleet Services supports all City departments that rely on vehicles and equipment to deliver their services and operates out of nine garages located throughout the city.  We currently have openings for Vehicle & Equipment Technicians 2 (310T Mechanics) in our Fleet Maintenance and Technical Service Branch.  
The City of Ottawa is a diverse, inclusive, and supportive workplace, committed to providing all employees with an opportunity to thrive. We support employees to learn, progress and grow with access to development opportunities like mentoring, coaching, job shadowing, special on-the-job assignments, leadership development, language training, job-specific training, and all required health and safety training.
Unionized with CUPE 503, the City offers an excellent employee benefits package and pension plan along with other benefits as listed below, to ensure that our employees and their families have access to the resources they need (as outlined in the CUPE 503 Collective Agreement):
•    Health, Dental and Vision Care benefits
•    Paid sick leave
•    Special leave 
•    Long term Disability
•    Life Insurance
•    Membership in OMERS pension fund with 100% Employer matching pension contributions
•    Employee and Family assistance programs that helps you and your family find solutions for a wide range of life’s challenges.
•    Progressive vacation time accrual based on length of service (3 weeks vacation to start that increases to 4 weeks after five years of continuous service and progressing up to a maximum of 7 weeks)
•    13 paid public holidays as listed in the Collective Agreement
•    Tools Allowance - $460 annually
•    Boots Allowance - $225 annually
•    Shift Premiums – an additional 7% hourly on qualified shifts as per the Collective Agreement
•    Overtime pay: any hours worked above the regular schedule are paid at a rate of 1.5 times the regular hourly rate as per the Collective Agreement
•    Paid Uniforms
•    Learning and development - Learning and development options include e-learning online resources, and in-class or virtual instructor-led courses.

JOB SUMMARY

Fleet Maintenance & Technical Services is responsible for: scheduled, unscheduled and emergency service; seasonal overhauls; vehicle commissioning/decommissioning; vehicle inspections and certifications; warranty monitoring; shop and specialty tool maintenance/management; maintenance of small equipment and special equipment such as fire, ambulance, ice resurfacing, turf, etc.; repair performance analysis; and Technical Services including specifying, acquiring, leasing and disposing of Municipal Fleet Vehicles.

You are responsible for performing a wide range of duties expected of a Vehicle and Equipment Technician 2, including, but not limited to, the following: conducting diagnostic inspections, performing general mechanical overhaul and repair work, and performing scheduled preventive daily maintenance inspections and repairs on vehicle system and components including, but not limited to, steering, suspension, electrical, ignition, fuel, emission control/exhaust and engine management, hydraulics, and vehicular climate control systems.  

You perform all maintenance and repairs to a wide variety of fleet vehicles systems and components including, but not limited to, vehicles powered by gas, diesel, propane or natural gas, tractors, graders, loaders, dozers, cranes, mowers, heavy vehicles (i.e. garbage trucks, zambonis, ice resurfacing equipment, etc.), and automotive associated equipment including, but not limited to, boilers and compressors.

EDUCATION AND EXPERIENCE

Completion of Truck and Coach Technician 310T apprenticeship program of 6720 hours

Minimum of 2 years of experience within a Municipal Fleet or similar truck and coach environment

CERTIFICATIONS AND LICENCES

KNOWLEDGE

• City policies and procedures affecting shop operations
• Considerable knowledge of the vehicle systems and the standard practices, safety issues, materials, tools, equipment and supplies to carry out maintenance operation
• Manual and electronic diagnostic equipment 
• Personal computers with ability to use the Fleet Management Information System
• Code of Conduct rules and policy
• Collective agreement
• Material Safety Data Sheets
• Safe work practices of the trade including working at heights and the lifting of heavy objects
• Knowledge of applicable health and safety legislation, including the rights and duties of workers.

COMPETENCIES, SKILLS AND ABILITIES

• Work independently with minimal direction, and collaboratively with peers and managers as part of a maintenance repair team 
• Ability to read, understand and interpret blueprints, wiring diagrams, service manuals, schematics, drawings, work orders and any other documents used in the maintenance operation
• Ability make estimates of materials and time required to perform the work 
• Ability to proceed effectively with emergency work including on the road work with limited resources to provide maximum results and timelines
• Skill in the use of jacks, hoists, overhead cranes, lift trucks and mobile lifting devices
• Skill in the use of high-pressure gas and electric welding equipment (Mig. Arc. Bronze, steel, aluminum) to effect repairs as authorised under the technician license
• Possess analytical skills and be detail oriented
• Good manual dexterity and ability to work to close tolerances 
• Able to communicate effectively, both orally and in writing, with management, manufacturers and engineers to provide for problem solving and suggest corrections to problems found on specialized vehicles and equipment
• Ability to provide training and explain instructions and guidelines to others effectively
• Able to efficiently use, operate and maintain tools, precision measuring instrument, state-of-the-art automotive diagnostic and test equipment to diagnose mechanical, electrical and hydraulic malfunctions
• Possess a work record of good attendance and job performance 
• Possess sound judgement 
• Use initiative to meet deadlines
• Flexible, adaptable and able to accept constructive criticism
• Physically fit with stamina to perform the duties of the trade (which may include working in a standing position for long time)
• Able to work in uncomfortable or confined positions on occasion
• Able to lift and carry heavy parts and equipment safely
• Able to tolerate exposure to moderate amounts of noise, dust, grit, oil/grease, fumes, solvents, paints, lacquers, hot/sharp metals and surface finishing products
• Provide own hand and air tools relating to the trade (SAE & Metric as required) according to provisions of the collective agreement 
• Able to work a variety of scheduled shifts, including week-ends, on-call, evening and nights, as per the collective agreement
   

JOB SUMMARY

You are responsible for providing a wide variety of confidential administrative support services in support of a department head/General Manager.

You serve as a point of contact for client departments, senior managers, senior external contacts and members of City Council, providing an initial response to standard inquiries and directing non-standard inquiries as appropriate. Duties and responsibilities also include conducting research and compiling documentation and data in support of branch projects or departmental inquiries, generating and making revisions to reports, creating and updating databases and project files, and coordinating the administrative processes.

Note: This is a generic job description that describes the typical duties of this job. Individual positions may not require the performance of all of these responsibilities, or additional related duties, within the scope of the job, may be assigned.

EDUCATION AND EXPERIENCE

Completion of 2 year community college diploma in Business/Office Administration or related field

Minimum of 4 years of clerical/administrative experience

KNOWLEDGE

• Relevant dispositions of regulations and legislation pertaining to the branch
• Branch goals, objectives, policies and procedures
• The City of Ottawa’s departments and internal operational and administrative procedures and relevant contacts
• General knowledge of MFIPPA regulations
• Principles and practices of office management
• Record keeping, filing and general office procedures
• Database and records management practices
• Information verification and basic statistical analysis techniques
• Computer applications, including Microsoft Word, Excel, PowerPoint, Access, SAP, Electronic Records Management System and other corporate standard software as required
• Knowledge of applicable health and safety legislation, including the rights and duties of workers General knowledge of City of Ottawa payroll and financial systems and branch policies, practices, functions, systems and procedures is an asset

COMPETENCIES, SKILLS AND ABILITIES

• Work independently and as a flexible and co-operative member of a team
• Excellent organization and time management skills and techniques: ability to work under pressure to meet tight time schedules and deadlines, prioritizing work and handling significant problems and tasks which come up simultaneously or unexpectedly
• Strict attention to detail and accuracy in the maintenance of records: ability to balance spreadsheets and produce statistical reports
• Conduct background research to investigate and solve problems in support of management and staff information needs, as well as project implementation
• Client service oriented: ability to use effective and tactful oral and written communication skills with clients at all levels of the organization
• Compile, organize and summarize data and information accurately and efficiently, applying policies and procedures
• High level of competence in dealing with sensitive issues
• Exercise independent initiative and establish priorities for own workload
• Exercise sound judgment, discretion and a high degree of confidentiality
• Interpret and explain rules, regulations and policies
• Discretion and confidentiality
• Make decisions on both routine and non-routine problems Integrity, tact and good judgment

Core Behaviours 

Core behaviours define the City's expectations of the behaviours employees should demonstrate in performing their work.  They are reflective of the City's culture and values and guide all our present and future activities.  Every employee is encouraged to learn, embody, and demonstrate these core behaviours. 

Review the Core Behaviours. 

Leadership Competencies 

The City has defined key competencies that leaders are expected to embody and demonstrate to successfully move the organization towards achieving its strategic objectives and create an organizational culture that supports and empowers employees to excel, grow and reach their full potential. These leadership competencies and associated behaviours are expected to be demonstrated by leaders at all levels of the organization.  

Review the Leadership Competencies.