All jobs within 50 km around Brantford

The Apprentice – Machinist position under continuous supervision is responsible for setting up, operating, and adjusting various types of conventional or automatic machines including lathes, drill presses, grinders, and other precision equipment. Primarily accountable for working from drawings and written instructions to create replacement and new parts in making repairs to metal parts as well as for experimental apparatus or prototype equipment.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Fit and assemble machined parts into complete units.

· Apply knowledge of machine shop theory and procedures, shop mathematics, machine ability of materials and layout techniques, using hand and power tools.

· Compute dimensions and tolerances and measure and lay out work pieces.

· Calculate and set controls to regulate machining factors, such as speed, feed, coolant flow, and depth and angel of cut, or enter commands to retrieve, input, or edit computerized machine control media.

· Start and observe machine operation to detect malfunctions or out-of-tolerance machining and adjust machine controls or control media as needed.

· Set-up and operate machine on trial run to verify accuracy of machine setting or programmed control data.

· Adjust and set up machining equipment and tooling for use by machine operator(s).

· Report deviations from specifications and tolerances to supervisor.

· Maintain and complete quality assurance reports.

· Study assembly drawings, sectional views and drawings.

· Review drawings prior to jobs understanding critical dimensions and machining tolerances to identify missing information or measurements.

· Ability to monitor speed settings and feed rates for drills, lathes and mills.

· Ensure machines are operating within specified ranges and make adjustments as needed.

· Consider work process, materials and experience using different tools and equipment to determine whether tools suit purpose assess quality of cuts and grinding throughout machining process.

· Other duties assigned as needed.

Credentials

· High School Diploma or equivalent general education.

· Enrolled in an apprenticeship and a certificate of qualification program as a general machinist.

· Knowledge using computer-assisted design, manufacturing and machining software.

· Interpret scale drawings at various points throughout machining processes.

· Possess good judgement to assess suitability of tools and equipment for machining jobs.

· Ability to discuss work plans and coordinate tasks with co-workers completing large orders.

Desired Characteristics

· Read and interpret blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work-pieces.

· Ability to work independently to interpret, plan and produce or repair parts and in a team as needed.

· Possess drive and motivation to maintain continuous learning from daily work activities

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

Under direct supervision, assist in establishing and implementing organizational policies and procedures related to local, provincial, and federal health and safety regulations. Ensure compliance through regular audits of laboratories and facilities, and provide training on emergency response, hazardous material handling, and industrial hygiene. Oversee the collection, storage, transportation, and shipping of hazardous waste.

Performance Expectations

• Conduct health and safety audits; both compliance and program based. 
• Prepare comprehensive written reports with clear findings and recommendations.
• Monitor, measure, and report on environmental health and safety performance.
• Act as an environmental health and safety resource to the Human Resources Manager.
• Review current policies and procedures to ensure compliance with the Occupational Health and Safety Act/Regulations and other relevant workplace legislation.
• Carry out health and safety objectives and programs within the facility.
• Develop, implement and monitor health and safety policies and procedures of the facility. 
• Serve as a resource and provide guidance and assistance to the Joint Health and Safety Committee at the facility.
• Provide safety training to all managers/supervisors, employees, and Joint Health and Safety Committee, regarding their duties and responsibilities, health safety and the law, incident investigations, hazard identification, workplace inspection and promotion of safety awareness.
• Ensure health and safety orientation/job-specific training for all new employees, transferred employees and/or promoted employees are conducted. 
• Review the Workplace Hazardous Materials Information System and update and implement procedures and practices, and ensure training is conducted promptly.
• Review safety statistics, conduct trend analysis and make recommendations for continual improvements. 
• Review illnesses and injuries both occupational and non-occupational with the health nurse and the company physician to ensure lost time is minimized.
• Review the Workplace Safety Insurance Board (WSIB) claims to make recommendations to minimize the time of work and maximize the safe return to work program. No direct involvement
• Conduct required workplace inspections, and facility audits and provide a corrective/prevention action plan complete with responsibilities and timelines.
• Perform other duties/projects as assigned. 

Credentials

• A minimum of 5-7 years of related experience.
• Typically requires a bachelor’s degree in an appropriate scientific or engineering field or equivalent.
• Completion of Canadian Registered Safety Professional (C.R.S.P.) designation or actively working towards the designation.

Desired Characteristics.

• Ability to communicate with external and internal stakeholders. For example, communicate with members of the medical community to gain insight into evolving ways to modify work environments to meet the needs of disabled employees. Use this information to analyze programs in effect in the workplace and provide input to policy development regarding the accommodation of disabled employees' needs.
• Extensive knowledge and application of environmental health and safety legislation and industry standards. Ability to review a variety of sources such as legislation on health and safety standards to become informed of the scope of employee relations cases. 
• Develop cost-benefit analyses for a wide range of programs, such as health and safety training programs, to present the company with significant input to long-range human resource planning.
• Ability to work independently to conduct research and develop policy papers and reports. Work as a team member in both internal and external working groups. Work with industry-wide professional organizations, boards and colleagues both inside and outside of their organization.
• Experience with ISO 14001 and ISO 45001 is an asset. 
• Undertake continuous learning through courses, such as community college and university courses, through on-the-job initiatives and highly developed networking and professional liaison. Attend conferences and seminars and read professional journals to learn about best practices and emerging trends in health and safety as needed.

What Linamar Has to Offer

• Competitive Compensation
• Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. 
• Opportunities for career advancement.
• Sustainability Counsel 
• Community based outreach supporting both local and global initiatives and charities. 
• Discounts for local vendors and events, including auto supplier discounts.

Reporting to the Maintenance Manager you will perform maintenance and repair services of facility systems including mechanical, electrical, and building systems. The primary emphasis of this role is to perform a variety of maintenance tasks with minimal supervision.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

Key Accountabilities

·     Establish and maintain maintenance standards and develop and recommend maintenance programs

·     Install new equipment using outside services if required

·     Maintain the equipment and facility through preventive/predictive maintenance program

·     Consults the work orders and personal log book for jobs to be done

·     Keep equipment and facility in working condition for maximum uptime

Minimum Requirements

·     A High School diploma or equivalent

·     Fully skilled in one or more trades (433A Millwright preferred)

·     Two or more years of experience

·     Basic welding skills

·     Knowledgeable in different controls (i.e. Fanuc, Siemens)

·     Advanced knowledge in troubleshooting servo motors, drivers, encoders etc.

·     Able to read and understand all codes and regulations

Desired Characteristics

·     Able to work in a fast paced environment

·     Able to perform tasks independently under general direction

·     Ability to supervise and train apprentices and maintenance labourers

·     Ability to work all rotating shifts

·     Ability to work overtime as required

Why Linamar

·     Opportunities for career advancement

·     Assistance with approved licenses and fees

·     Community based outreach supporting both local and global initiatives and charities

·     Social committees and sports teams

·     Discounts for local vendors and events, including auto supplier discounts

Linamar is committed to promoting accessible recruitment as outlined in the Accessibility for Ontarians with Disabilities Act. Linamar will attempt to accommodate persons with a disability in an appropriate and effective manner throughout all stages of the recruitment process. Accommodations will be provided upon request.

INDGSFD

700 Woodlawn Road West, Guelph, Ontario, N1K 1G4, CA

Overview

Overview

Overview

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

You will play a key role in supporting our production and shipping team in a fast-paced work environment. Your function as a tow motor operator will be to support the production lines, load, unload and move materials as needed throughout the facility 

Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

 
Requirements
 

• Completion High School Diploma or equivalent
• Licensed to operate a tow motor and propane
• Good time management skills to prioritize assignments delegated by your Supervisor
• Experience is an asset

 
Why Linamar
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

 
Linamar is committed to promoting accessible recruitment as outlined in the Accessibility for Ontarians with Disabilities Act. 

Coordinate and supervise the production of various financial statements and to ensure accuracy of all financial transactions. Responsible for directing an accounting associate.  May participate in complex general accounting projects. 

Responsibility

• Provide monthly and yearly comparative financial information to management for planning and to foster continuous improvements.
• Develop and maintain cost and profit estimates for new and existing product lines and generating monthly cost reports and trends. 
• Maintain and make recommendations for an adequate information system to measure financial and operational results of the plant.
• Work closely with management in directing and controlling resources.
• Maintain and make recommendations regarding a system of internal control.
• To ensure that all positions reporting to the Accounting Supervisor are filled with the appropriate persons.
• To ensure that the company’s accounting computing needs including EDI are met on an ongoing basis.
• To ensure that statutory financial obligations including audit, tax and others are met.
• Government filings are completed on a timely and efficient manner.
• To be available for special corporate assignments as requested.

Academic/Educational Requirements

• A university degree in Business Administration, Accounting designation is required.

Required Skills/Experience

Group Summary:

Minimum Qualifications:

• Licensed Electrician or equivalent electrical engineering certificate
• Completion of an industrial electrician apprenticeship program or equivalent  
• Minimum 5 years’ experience in the automotive industry as an industrial electrician
• Knowledge of electric circuitry of relay, PC and PLC logic.
• Working knowledge of the Canadian Electrical Code, Occupational Health and Safety Act, Lockout Policies and electrical, hydraulic, and pneumatic systems 
• Ability to perform basic wiring work, conduit bending and control cabinet wiring.   
• Ability to work with minimum supervision. 
• Good communications skills and must be able to communicate fluently in both written and spoken English.

Duties and Responsibilities:

• Safe Installation and repair of equipment

• Install, examine, replace and repair electronic wiring, receptacles, switch boxes, conduits, feeders, cable assemblies, lighting fixtures and other electrical components. 
• Test electrical and electronic equipment and components for continuity, current, voltage and resistance.
• Inform the Maintenance Manager about changes in electrical circuits and updates to the original diagrams
• Wire new control panels according to drawings and verbal instructions under consideration of Hydro codes and other applicable standards and regulations.
• Pass on information, experience and knowledge to other maintenance employee, to ensure effective, non-repetitious problem solving and machine repairs. 
• Work in a cost-effective manner and maintains a high standard of quality and excellent workmanship. 
• Conduct preventative maintenance programs and keep maintenance records. 
• Must have continuous improvements on machinery and equipment.  Meet schedule set by maintenance Manager.
• Use different PLC programming devices including software to modify and read logic control programs.  Perform other assignments from time to time as managements so directs.
• Inform the Maintenance Manager or depending on the shift, inform the
• Production Supervisor to the best of his ability about unusual things, faulty design, unsafe conditions, missing parts, etc. Adhere to standards and rules described in the Employee Handbook, conduct in a manner consistent with those practices leading to the safe operation of the division and displaying leadership, concerns and a safe work ethics.

• Perform other duties as required within his/her ability.

• Actively and positively support the continued practice of Common Values behaviours

Awareness, Unity, Empowerment:

At Magna, we believe that a diverse workforce is critical to our success. That’s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email to comply with GDPR requirements and your local Data Privacy Law.

Regular / Permanent

Magna Powertrain