All jobs within 50 km around Brant

Job Description

• The candidate must establish methods to meet work schedules.
• The candidate will be responsible for supervising and coordinating the activities of staff who prepare and portion food.
• The candidate must train staff on job duties, sanitation, and safety procedures.
• The candidate must estimate the ingredients and supplies needed for meal preparation.
• The candidate will be responsible for hiring food service staff.
• The candidate must ensure that the food and service meet quality control standards.
• The candidate must prepare budgets and cost estimates.
• The candidate will be responsible for addressing customer complaints or concerns.
• The candidate must prepare and submit reports.
• The candidate must prepare food order summaries for the chef.
• The candidate will be responsible for supervising and checking assembly of trays.
• The candidate will be responsible for supervising and checking the delivery of food trolleys.
• The candidate must establish work schedules.

Job Requirements

• The candidate should be fluent in English language.
• The candidate must have a certificate of Secondary (high) school graduation.
• The ideal candidate will have at least 2 to 3 years of experience in a related industry.

How to Apply

If you have a keen interest in applying, kindly utilize the provided alternatives to submit your application.

By email

[email protected]

Overview

Performance Expectations

• Read blueprints, drawings and specifications to determine layout of plumbing system, water supply
• Network and waste and drainage systems
• Assemble, install, repair, and maintain domestic, commercial or industrial plumbing fixtures and systems
• Locate and mark positions for pipe connections, passage holes and fixtures in walls and floors
• Cut openings in walls and floors to accommodate pipe and pipe fittings
• Measure, cut, bend and thread pipes using hand and power tools or machines
• Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment
• Test pipes for leaks using air and water pressure gauges
• Travel to job sites to complete work
• Train and oversee apprentices and labourers
• Ensure that all work is completed according to plumbing code
• Maintain and organized and clean work vehicle and work site
• Cleaning the job site after work is completed
• Answer client questions
• Complete work orders
• Work rotating on-call for emergency service
• Complete jobs independently or as part of a team, depending on the specific assignment
• Perform other duties as assigned

Credentials

• Successful completion of an Ontario Secondary School Diploma (OSSD) or equivalent, preferably in a technical program.
•  Successful completion of a current Ontario license for Journeyman Plumber 306A or Pipefitter 307A. A 307A steamfitter license is also acceptable and or Sr. Apprentices
•  Minimum of 3 years experience, or schooling
• Willing to learn on the job
• Good math and measurement skills
• Excellent manual dexterity
• Exceptional active listening and problem-solving skills
• Plumbing license (senior apprentices will also be considered)
• Gas Technician 3 (asset but not required)
• Gas Technician 2 (asset but not required)
• Backflow tester (asset but not required)

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

32 Independence Place, Guelph, Ontario, N1K 1H8, CA

Job Summary

Performs complex or extensive scope business analysis work, including business process analysis, gathering information on and interpreting business requirements and models.

Responsibility

• Define scope and objectives on assigned projects. 
• Prepare functional process charts to analyze business operations. 
• Plan, design or modify practical manual and automated business procedures. 
• Assist with the design of business processes and documentation. 
• Prepare detailed specifications for business applications. 
• Follow PPLM (Project & Product Linamar Methodology) on all Projects. 
• Perform a lead role in the planning, design, development, and deployment of new business applications and enhancements to existing business applications. 
• Meet with decision makers, systems owners, and end users to define business requirements and systems goals, and identify and resolve business systems issues. 
• Perform cost-benefit and return on investment analyses for proposed systems to aid management in making implementation decisions. 
• Work with QA team to coordinate and perform in-depth tests, for modified and new systems. 
• Analyze and organize large data sets to identify insights and present them in user-friendly formats, enabling informed business decisions.
• Conduct research on hardware and software products to justify recommendations and to support purchasing. 
• Provide orientation and training to end users for all modified and new systems. 
• Meet with clients to discuss topics such as project activities, technical specifications, current business practices, growth plans, regulatory and reporting requirements and security risks. 
• Conduct unit testing to validate data accuracy and ensure system outputs align with business requirements and use cases.
• Check calculations on supplier invoices. Confirm quantities, prices and amounts, check tax calculations and verify totals.
• Various special projects and ad hoc requests as assigned.

Academic/Educational Requirements

• University degree or college diploma in the field of computer science, information science, management information systems, business administration, finance or a related discipline. 
• PMI CAPM/PMP certification or relevant courses are preferred.

Required Skills/Experience

• Minimum of three years of work experience as a System Analyst, Project Lead, Business Analyst, Accounting or Finance Manager. 
• Knowledge and experience with Microsoft T-SQL, SSIS, SSRS, SSAS and / or Oracle database 
• Knowledge of business applications (OneStream, SAP BPC) and ERP systems (IFS, SAP, JD Edwards, etc.).
• Ability to interpret process flow charts to understand what data is captured and how it travels between various applications and hardware components.
• Ability to assess the suitability of database platforms and software applications such as enterprise reporting tools and online transaction processing systems. 
• Must have an in-depth understanding of project management methodologies and how to apply them. 
• Ability to work independently and on teams 

The Janitor position is responsible for cleaning, painting and maintaining the interior and exterior of buildings, equipment,  facilities and their surrounding grounds. Additional responsibilities include waste removal and maintaining clean conditions to ensure safety and cleanliness. 

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Run floor scrubber.

· Empty garbage and recycling bins when required.

· Vacuum, sweep, and mop all required areas.

· Wash or scrub designated areas and equipment as required.

· Maintain outside company property when required.

· Work in conjunction with maintenance and production personnel as needed.

· Calculate cost of supplies by multiplying unit prices by quantities and totaling them.

Credentials

· High School Diploma or equivalent general election.

· Previous cleaning or janitorial experience considered an asset.

· Able to interact with employees to provide and receive job-related information, assess cleaning situations and discuss solutions.

· Ability to read and understand Workplace Hazardous Materials Information System (WHMIS) labels on products to understand applicable safety cautions.

Desired Characteristics

· Ability to handle complaints and respond to emergency situations.

· Ability to work independently, but coordinate work schedules with others.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

355 Massey Road, Guelph, Ontario, N1K 1B2, CA

The Engineer - Process position will be responsible for determining the operations for fabrication and assembly of products by reviewing parts drawings, specifications, and other engineering data. Primarily accountable for planning, scheduling, conducting, or coordinating phases of major engineering projects in addition to developing sequence of operations, estimate time requirements for each, and prepare operation sheets.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

 400 Massey Road, Guelph, Ontario, N1K 1C4, CA

• Work with production planning to set shop priorities and ensure all necessary tools and documentation needed in the plant are available.
• Attend Advance Quality Planning meetings to finalize design of required fixtures and tooling.
• Interface with suppliers of raw material and tools to establish engineering requirements for start of production.
• Investigate and find resolution of specific processing problems for assigned projects and parts.
• Prepare quotations for new jobs, including material and processing costs, tooling, gauges and capital investment costs if required.
• Participate in productivity improvement investigations.
• Conduct time studies.
• Maintain ongoing process control through quality troubleshooting and process improvement investigation.
• Regular review of all processes and operator instructions for assigned customers to ensure accuracy and conformance to actual procedures.
• Collect data and develop statistics to describe equipment and system functionality.
• Estimate durations of development, fabrication, construction and repair tasks.
• Define which materials and equipment to use for projects and select appropriate codes.
• Complete work order and change work order forms to notify key parties about projects.
• Assume project management roles to co-ordinate the involvement of other engineers, contractors, technicians and suppliers.

Credentials

• Post-Secondary education in Engineering or Equivalent.
• Minimum three years of related experience.
• Knowledge/work experience in machine processes, cutting tools, fixtures, CNC and Special purpose machines.
• Working knowledge of ISO-TS16949 and ISO 14001, and with mechanical blueprint interpretation including GD and T.
• Good computer skills, including Word, Excel and Outlook.
• Experience with the use of statistical analysis software and computer-assisted design, manufacturing and machining (i.e. AutoCAD, CAD/CAM and SolidWorks).

Desired Characteristics

• Able to interact with supervisors or managers and integrate work within teams of engineers and technicians to work on common projects.
• Attend formal professional development seminars and conferences as needed.

What Linamar Has To Offer

• Opportunities for career advancement.
• Community based outreach supporting both local and global initiatives and charities.
• Social committees and sports teams.
• Discounts for local vendors and events, including auto supplier discounts.

Overview

The Materials Coordinator position, under general supervision, responsible for establishing the quantity and order date for materials needed to meet the master production schedule. In addition, initiate purchase or production requisitions as appropriate.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Coordination and release of vendor materials to meet daily production schedules.

· Directly influence weekly and long term production requirements for all lines, through the daily analysis of customer releases.

· Manage inventory stock levels by applying advanced inventory control techniques; monitoring and update minimum and maximum stock levels.

· Inventory management; maintain target inventory level for raw and finished good products, cycle counting and physical inventory.

· Develop and maintain weekly and daily shipping schedules for all customers and vendors.

· Utilize customer software systems to communicate their daily standards.

· Dispute any infractions to our Customer rating when applicable.

· Maintain close support with all Subcontracting suppliers to ensure all schedules are being met.

· Expediting of all customer and vendor requirements when necessary.

· Coordination of transportation and vendor releases to assure the timely delivery of materials and to minimize freight costs.

· Generation of Customer and Vendor Delivery performance metrics.

· Perform monthly Physical inventory, when necessary by Materials Manager.

· Maintaining computerized inventory control system in conjunction with manual systems.

· Provide information to customs department for clearing incoming/outbound shipments, i.e. purchased items, raw material, machines, etc.

· Receive assignments from supervisors at beginning of each shift and plan how best to sequence tasks to meet deadlines.

· Complete forms, such as weekly inventory sheets.

· Communicate with suppliers to confirm details, such as purchase order numbers.

· Calculate invoices and accept cash, cheque or credit card payments from customers.

Credentials

· Post-Secondary education in Materials Management or related experience.

· Minimum two years production planning experience in a manufacturing environment.

· MRP and Web-based Customer System (Ford DDL, GM SupplyPower, DCX S.M.A.R.T.) considered an asset.

· Knowledge of QS9000, TS16949 and ISO14001.

· Ability to read forms, such as invoices, parts order forms, packing slips and bills of lading.

· Use computer-operated machinery such as print delivery slips using computerized printers.

Desired Characteristics

· Ability to work with a partner and independently as needed.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

Performance Expectations

Plan and direct highway and/or local drivers on daily freight pick-up and deliveries

Pre-plan driver’s trip itineraries and communicate those with all drivers

Track equipment, freight, and drivers through use of satellite and/or two-way radio

Communicate and direct customer service on issues and information that need to be communicated to customers, such as freight delivery delays and billing issues

Collect, sort, and distribute all driver trip envelopes

Ensure that all driver trip envelops are complete and accurate

Ensure that all customer needs and freight requirements are met through instructions and trip planning of the drivers

Prioritize loads and customers to accommodate changes and problems as they arise

 

Credentials

Completion of Secondary school diploma

Ability to interpret and give both verbal and written instructions

Excellent verbal and written communication skills

Prioritization skills and be multi-task oriented

Ability to develop and maintain co-operative working relationships with co-workers and customer

Ability to accomplish task in a controlled, effective manner while working under stress

Keen attention to detail

Leads and directs the work of others

What Linamar Has To Offer

Opportunities for career advancement.

Community based outreach supporting both local and global initiatives and charities.

Social committees and sports teams.

Discounts for local vendors and events, including auto supplier discounts.

This position is a temporary and seasonal part-time role requiring use of one's personal vehicle to deliver packages primarily in residential areas. They will perform in a physical, fast-paced, outdoor position involving continual lifting, lowering, and carrying packages.
Its a seasonal position with an projected end date of January 12,2025.
Responsibilities:

• Retrieves, loads packages into personal vehicle, and delivers packages to customers.

Shifts: Monday to Friday starting at 11 am (part-time, up to 5 hours a day)

Pay rate: $17.30/hr.

Mileage: $0.70/km

* APPLICANTS MUST BE ABLE TO WORK UP TO 25 HOURS PER WEEK**
Qualifications:

• Meets local age and operations requirements to operate a vehicle.
• Ability to lift up to 70 lbs./32 kgs.
• Excellent customer contact and service skills
• Must be willing to use personal vehicle to transport and deliver packages.
• Able to lift up to 70lbs
• Comfortable working in a fast-paced customer facing and outside environment
• Must have a valid Ontario G driver’s license
• Vehicle registered in candidate's name
• Valid vehicle insurance

UPS Canada is a diverse and equal opportunity employer. Please advise our HR representatives if workplace accommodation is needed. Thank you for your interest in UPS Canada.