All jobs within 200 km around Sarnia

Overview

Overview

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

You will play a key role in supporting our production and shipping team in a fast-paced work environment. Your function as a tow motor operator will be to support the production lines, load, unload and move materials as needed throughout the facility 

Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

 
Requirements
 

• Completion High School Diploma or equivalent
• Licensed to operate a tow motor and propane
• Good time management skills to prioritize assignments delegated by your Supervisor
• Experience is an asset

 
Why Linamar
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

 
Linamar is committed to promoting accessible recruitment as outlined in the Accessibility for Ontarians with Disabilities Act. 

Coordinate and supervise the production of various financial statements and to ensure accuracy of all financial transactions. Responsible for directing an accounting associate.  May participate in complex general accounting projects. 

Responsibility

• Provide monthly and yearly comparative financial information to management for planning and to foster continuous improvements.
• Develop and maintain cost and profit estimates for new and existing product lines and generating monthly cost reports and trends. 
• Maintain and make recommendations for an adequate information system to measure financial and operational results of the plant.
• Work closely with management in directing and controlling resources.
• Maintain and make recommendations regarding a system of internal control.
• To ensure that all positions reporting to the Accounting Supervisor are filled with the appropriate persons.
• To ensure that the company’s accounting computing needs including EDI are met on an ongoing basis.
• To ensure that statutory financial obligations including audit, tax and others are met.
• Government filings are completed on a timely and efficient manner.
• To be available for special corporate assignments as requested.

Academic/Educational Requirements

• A university degree in Business Administration, Accounting designation is required.

Required Skills/Experience

Group Summary:

Minimum Qualifications:

• Licensed Electrician or equivalent electrical engineering certificate
• Completion of an industrial electrician apprenticeship program or equivalent  
• Minimum 5 years’ experience in the automotive industry as an industrial electrician
• Knowledge of electric circuitry of relay, PC and PLC logic.
• Working knowledge of the Canadian Electrical Code, Occupational Health and Safety Act, Lockout Policies and electrical, hydraulic, and pneumatic systems 
• Ability to perform basic wiring work, conduit bending and control cabinet wiring.   
• Ability to work with minimum supervision. 
• Good communications skills and must be able to communicate fluently in both written and spoken English.

Duties and Responsibilities:

• Safe Installation and repair of equipment

• Install, examine, replace and repair electronic wiring, receptacles, switch boxes, conduits, feeders, cable assemblies, lighting fixtures and other electrical components. 
• Test electrical and electronic equipment and components for continuity, current, voltage and resistance.
• Inform the Maintenance Manager about changes in electrical circuits and updates to the original diagrams
• Wire new control panels according to drawings and verbal instructions under consideration of Hydro codes and other applicable standards and regulations.
• Pass on information, experience and knowledge to other maintenance employee, to ensure effective, non-repetitious problem solving and machine repairs. 
• Work in a cost-effective manner and maintains a high standard of quality and excellent workmanship. 
• Conduct preventative maintenance programs and keep maintenance records. 
• Must have continuous improvements on machinery and equipment.  Meet schedule set by maintenance Manager.
• Use different PLC programming devices including software to modify and read logic control programs.  Perform other assignments from time to time as managements so directs.
• Inform the Maintenance Manager or depending on the shift, inform the
• Production Supervisor to the best of his ability about unusual things, faulty design, unsafe conditions, missing parts, etc. Adhere to standards and rules described in the Employee Handbook, conduct in a manner consistent with those practices leading to the safe operation of the division and displaying leadership, concerns and a safe work ethics.

• Perform other duties as required within his/her ability.

• Actively and positively support the continued practice of Common Values behaviours

Awareness, Unity, Empowerment:

At Magna, we believe that a diverse workforce is critical to our success. That’s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email to comply with GDPR requirements and your local Data Privacy Law.

Regular / Permanent

Magna Powertrain

We are seeking a Full time Security Guard in London, Ontario. This is mat leave coverage up to one year. 

This role requires someone to pass a background check and for this one has to be permanent resident or canadian citizen.

We value diversity and inclusion and encourage all qualified people to apply.

https://www.securitas.ca/careers/security-guard

The posting will remain open until filled.

Position Overview:

Wages: $ 18.25 an hour.

Shift timings: Mon - Fri (3pm to 11pm) 

RESPONSIBILITIES:

• Perform access control provision duties, verify visitors coming on-site and parking enforcement. Dispatch duties via radio communication accepting all radio calls.
• Escort medical staff including paramedics, police and firefighters when required.
• Respond to medical emergencies and be prepared to perform CPR and AED if needed.
• Unlock and lock doors for access by authorized persons.
• Investigate incidents of trespassers along fence perimeters and property. Deter trespassers from the property.
• Follow security breach procedures by notifying supervisors or other appropriate personnel when security breaches occur.
• Monitor CCTV footage and cameras for irregularities and perform dispatch duties for the site including emergency response.
• Perform foot patrols inside and outside the facility.

QUALIFICATIONS: 

• Valid Ontario Security License
• Valid First Aid and CPR Certificate
• Thorough understanding of security protocols and procedures including emergency response.

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar
 
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

The Level 1 – Maintenance Labourer position, under the supervision and direction of the Maintenance Supervisor assist Millwrights and Maintenance Mechanics in day to day maintenance activities.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Maintain systems to track, report, document and assist with scheduled preventative maintenance.

· Record coolant refractometer readings, top up machine oils, and record usage.

· Manage oil and coolant inventories.

· Housekeeping of storage area for fluids.

· Operate forklift and floor scrubber.

· Maintain equipment in a safe and clean manner.

· Ability to use CMMS (computerized maintenance and manufacturing system).

· Ensure compliance of maintenance instruction sheets and procedures.

· Attend maintenance daily meeting.

· Measure various physical properties using common measuring tools such as rulers, tapes, thermometers and scales.

· Evaluate condition of parts and equipment.

· Assess the safety of work environments.

Credentials

· High School Diploma or equivalent general education.

· Minimum one year experience in manufacturing.

· Able to observe warning signs, such as scan phrases and icons on caution and warning signs to identify hazards in work areas.

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

Desired Characteristics

· Perform tasks independently under direct supervision.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

Fire Prevention Specialist/Inspector is a critical member of the Fire Prevention Team and are responsible for all aspects of fire prevention and education throughout the duration of their shift. This role would require the FPS to work a continental rotation shift of days and nights. You will hold NFPA Level I and II certificates, IMS100 certification, a G Class Drivers License. FPS reports directly to the Security Shift Supervisor and are responsible for the following:
 

Pay Rate: $25.00/hr

Shift: Days and Nights Continental Rotation

Life Safety Inspections:

• Inspection, maintenance and use of personal protective equipment including Self-Contained Breathing Apparatus (SCBA), identifying and reporting all deficiencies. 
• Basic maintenance of security patrol vehicles and reporting all deficiencies.
• Maintain operational knowledge of Client Fire Prevention Standard and relevant building and fire codes and enforce these codes and standards.
• Evaluates, establish, and enforce fire and life safety plans and conduct & observe fire evacuation drills.
• Delivers internal training to Securitas and Client personnel to raise awareness of fire prevention programs and activities.
• Provides technical support and training for employee personnel.
• Required to attend, and successfully complete, any training required by Client or designate which may be internal, off site or out of City.
• Conduct daily checks of CO2 and sprinkler riser systems.
• Conduct monthly checks of life safety devices as assigned by the S/AM.
• Complete fire safety shop audits and identify fire/safety concerns and report to confirm corrective action to eliminate hazards and follow up to confirm compliance.
• Identify, investigate, and report fire/safety hazards coordinating with SAM, Health & Safety or Facilities Engineering for repairs.
• Maintain operational knowledge of the mechanics and locations of the fire suppression systems on site.
• Maintain operational knowledge of sprinkler system mechanics to identify trouble signals, alarm signals, leaks and sprinkler flows on any given system.

Qualifications:

• Minimum Grade 12 or GED equivalent.
• Valid Ontario Security Guard License.
• Valid G class Driver’s License.
• NFPA 1001 Fire Fighter Level I & II from a recognized College.
• IMS 100.
• First Responder or Above from Canadian Red Cross.
• Mental Health First Aid Certificate issued by recognized provider.
• Completion of the annual FPI Medical Questionnaire.
• Must Successfully pass SCBA Fit Testing.
• Completion of an approved Certified Fire Inspector (CFI) course that meets the standards of NFPA 1031
• Mental Health First Aid Certificate issued by recognized provider.
• Must be able to display clear and quick thinking to resolve problems whilst being able to withstand stress and stay calm under pressure.
• Completion of the annual FPI Medical Questionnaire.
• Must Successfully pass SCBA Fit Testing.
• Completion of an approved Certified Fire Inspector (CFI) course that meets the standards of NFPA 1031 (required for full pay rate).
• Must be able to complete all site FPI required training.
• Able to carry out fire fighting and rescue duties in a team setting under arduous physical conditions. A capacity for rapid, intense and sustained physical effort is required.
• Speak, read and write English fluently, and communicate clearly under demanding conditions.
• Competent in the use of Outlook, Excel, Word and PowerPoint.
   

Group Summary:

QUALIFICATIONS:

• Graduate of Electrical or Mechanical Engineering Technology (Robot and Automation Program) and/or Provincial Electricians Ticket (442A or 309A) or equivalent
• 5+ Years of Automation Technician experience
• Previous experience with automated paint, production and process equipment preferred
• Must have strong computer skills in MS Office (Word, Excel, PowerPoint, Access, Project)
• Strong knowledge of PLCs (Allen Bradley, Siemens)
• Strong Knowledge of Robotics (ABB, Fanuc, Motoman)
• Strong knowledge of HMI programming (FTV, View, RSView32)
• Strong knowledge of various networks (Ethernet/IP, DH+, RIO, DeviceNet, ControlNet, Modbus2, RS232)
• Able to interpret and design electrical schematics
• Excellent problem solving, judgement and decision-making skills
• Proven ability to work in a team environment and lead problem-solving teams
• Must have a strong awareness of safety and proven safety record
• Must have demonstrated good work habits for a period of not less than six months in present job

MAIN DUTIES:

• PLC, robot and HMI programming, implementation and troubleshooting
• Preventative maintenance of production and support equipment
• Repair of equipment
• Design, verification and maintenance of electrical schematics
• Assist in setting up, maintaining programming, electrical components and schematic standards
• Assist in proper maintenance of all programming software, application files and programming hardware
• Completion of all required work orders and associated paperwork
• Responsible to improve equipment reliability and uptime related to automation and controls
• Implementation of Continuous Improvement Ideas related to automation and robotics as assigned
• Other duties as assigned

Awareness, Unity, Empowerment:

Regular / Permanent

Magna Exteriors