All jobs within 100 km around North Perth

**Wage from $19.31 to $22.21 per hour**

Assembler

The Assembler position, under direct supervision, is responsible for performing routine and repetitive assembly operations and processes. Additional responsibilities include activities such as checking, sorting, packaging, labeling, trimming and tying using simple hand tools.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Assemble, fit and install prefabricated parts to form subassemblies or finish products using hand and power tools.

· Position, align and adjust parts for proper fit and assembly and connect cables, tubes and wires.

· Fasten parts together using bolting and riveting equipment or other fastening and joining techniques.

· Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.

· Operate small cranes to transport or position larger parts as needed.

· Make sub-assemblies to drawings and specifications.

· Perform quality checks as needed..

· Complete SPC charts and flow sheets.

· Pack in approved containers.

· Access technical information and enter production data.

· Ensure compliance with all legislative requirements in the facility’s geographic location and:

· ISO 14001: Environmental Management system standard.

· ISO 45001 Occupational Health and Safety.

Credentials

· High School Diploma or equivalent general education.

· Minimum one year of training and/or experience.

· Ability to read and understand work orders to obtain information about the customers set up preferences.

· Interpret assembly and schematic drawings to troubleshoot technical problems with subassemblies and finished products.

· Ability to take measurements to perform such tasks as cutting wire to specific lengths or drilling holes in the correct location.

· Ability to use computer applications and prepare memos as needed.

Desired Characteristics

· Possess problem solving skills to resolve conflicts.

· Ability to work independently and/or work with a partner to complete large or complex jobs as needed.

· Possess drive and motivation to continuously learn and to maintain a current knowledge of equipment technology, electronics and safety.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

Responsible to perform PSAs (Potential Supplier Audits), responsible to close out PSA audit short falls.  Responsible to manage the APQP process to support program launches.  Responsible to develop and continually improve our Engineering Feasibility documents to include lessons learned by commodity/component.  Support supply crisis situations related to capacity and quality.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·       Ensure compliance with all legislative requirements in the facility’s geographic location and:

o   The Global Operating System Plays;

o   OHSAS 18001:2007 Health and Safety Management system standard;

o   ISO 14001:2004 Environmental Management System standard;

o   IATF/TS16949 Technical Specification Management and Linamar Quality Basics System standards.

·       Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

·       Maintain balance between customer, employee, and financial satisfaction by maximizing facility/department Performance Indicators (Linamar Supplier Scorecard System).

·       Supply Management including APQP, Launch, PSA’s and crisis management.

·       Maintain effective communication with internal and external customers to ensure program requirements are met.

·       Interpret regulatory quality documents in order to apply them to manufacturing and quality systems.

·       Be actively involved in quality planning of the supply base (Control Plans, APQP, FMEA, PPAP, MSA).

·       Identify gauging methods required for the supplier to ensure quality requirements are met.

·       Participate & lead in APQP meetings.

·       Initiate and participate in 8D Problem solving meetings with suppliers.

·       Review accuracy of process documentation and update as required.

·       Supplier development activities (Prototype running, pre-production process analysis, run at rate on site, early containment evaluation, process production release).

·       Part Readiness follow up and support.

·       Safe launch assurance and/or red launch follow up and solution.

·       Follow up on lessons learned matrix and read across, ensure added to engineering feasibilities by commodity/component.

·       Willingness to travel as needed.

Credentials

·       A bachelor’s degree in engineering or related engineering discipline is required.

Desired Characteristics

·       Five to seven years of related experience.

·       Experience with risk analysis and problem failure modes and effects analysis (FMEA) for automotive products.

·       Experience in writing and executing engineering test protocols.  Write quality assurance reports that describe manufacturing problems, corrective actions taken, and preventative measures needed.  Proposals are usually written for non-technical audiences such as clients and management.

·       Ability to make presentations to senior management during annual meetings to provide an overview of areas such as product costing, maintenance and equipment failures which need to be considered when planning for the coming year.

·       Read operating and quality assurance reports to understand technical and operational information about facilities, processes, and equipment.

·       Experience in drawing interpretations and geometric dimensional tolerancing.  Knowledge and experience in gauging methods, calibration, and gauge R&R’s.  Ability to take precise measurements using specialized equipment and techniques.

·       Lead and co-ordinate project teams which include other engineers, technologists, clients, and contractors when designing, developing, and building products or facilities.

·       Proficient with MS Office and CAD applications. Familiar with material processes and IATF/TS16949 standards.  Experience with the use of statistical analysis software and computer-assisted design, manufacturing, and machining.

·       Attend formal professional development seminars and conferences as needed.  Conduct self-directed studies by reading journals and trade publications.  Must be aware of new technologies and advances in the engineering field.

What Linamar Has To Offer

·       Opportunities for career advancement.

·       Community based outreach supporting both local and global initiatives and charities.

·       Social committees and sports teams.

·       Discounts for local vendors and events, including auto supplier discounts.

Our branded retail team is at the heart of our success. We represent the welcoming spirit of our company. Our retail teams are outgoing and approachable individuals who understand how our products and services fit into everyday life, and we’re excited to show customers how that technology can enhance and simplify their lives. We deliver a seamless experience, value expertise, dedication, and commitment to doing what’s right for our customers needs, every time.

At Rogers, we believe in fostering an environment that inspires personal growth, building careers, and creating an inclusive future for everyone.  If you’re passionate about technology, enjoy connecting with people, and thrive in a supportive team environment, consider exploring the following opportunity!

What does it mean to join our Rogers Team?

At Rogers, our retail team is the heart of our success.  Our Sales Associates are outgoing and approachable team members who understand that our customers rely on technology to enhance and simplify their lives and stay connected.  We are excited to show customers how our latest products and services can help, delivering best in class customer experiences in our retail stores

As a Sales Associate, you can expect to:

• Enhance the retail experience in our stores, by providing best in class service and value-added solutions to our customers

• Promote Rogers & Fido brands, including Rogers Mastercard  
• Engage and grow your customer base with personalized communication and outreach to customers via phone calls and business text messaging
• Participate in community events and outreach efforts to support local small businesses.
• Operate with a creative spirit that can adapt to an ever-changing environment while enjoying the thrill of hitting sales goals

What’s in it for you:

• Competitive compensation plus commissions
• One of the best flex health benefits, RRSP, TFSA and Pension plans in Canada
• Mental Health and Support benefits- 100% coverage
• Employee and Family Assistance Program benefits
• Employee discounts that can offer up to 50% off our Rogers & Fido products and services
• A commitment to fostering an inclusive and diverse workplace where all our team members can bring their whole selves to work
• A flexible schedule, including evenings & weekends (Min 20 hours/week)
• Career growth and development opportunities

What we’re looking for:

• You are great with people and are passionate about delivering an exceptional customer experience
• You love being part of a team and are a great collaborator
• You are excited and inspired by technology

• You meet the minimum age of majority in your province 

After you apply, watch your email

Candidates will be required to complete an online assessment as a next step.  If you are selected to move forward in the process, our recruitment team will reach out to you discuss the position further.  Successful candidates will be required to provide consent for and pass Background Check requirements.

To protect our people, brand and assets, a pre-employment background check will be conducted. As part of our selection process, all candidates must clear a criminal/credit background check and ID verification. Previous employment verification may be required depending on the role.

Schedule: Part time
Shift: Variable
Length of Contract: Not Applicable (Regular Position)
Work Location: 435 Stone Rd W., P9 (5388), Guelph, ON
Travel Requirements: Up to 10%
Posting Category/Function: Retail (In Store / Hourly) & Sales and Service
Requisition ID: 316855

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar
 
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

The Janitor position is responsible for cleaning and maintaining the interior and exterior of building, facilities and the surrounding grounds. Additional responsibilities include removal of waste and recycling containers and maintain sanitary conditions to ensure employee safety.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·    Empty garbage and recycling bins in office and plant.
·    Clean & sanitize all washrooms, cafeterias, and kitchenettes per housekeeping plan.
·    Operate industrial vacuum cleaners to remove scraps, dirt, heavy debris, and other refuse.
·    Sweep, mop, and scrub hallways, floors, and stairs.
·    Maintain outside company property. Eg: garbage pickup, window cleaning (lower levels only).
·    Work in conjunction with maintenance personnel as needed.
·    Maintain janitorial inventory levels. 
·    Operate floor scrubbing machine in the plant area.
 

Credentials

·    High School Diploma or equivalent general election.
·    Previous cleaning or janitorial experience considered an asset.
·    Ability to read and understand Workplace Hazardous Materials Information System (WHMIS) labels on products to understand applicable safety cautions.
 

Desired Characteristics

·    Ability to handle complaints and respond to emergency situations.
·    Ability to work independently but coordinate work schedules with others.
·    Good manual dexterity.
·    Attention to detail.
·    Clear and concise communication skills.
·    Able to interact with Supervisor to provide and receive job-related information, assess cleaning situations.
 

What Linamar Has To Offer

· Opportunities for career advancement.
· Community based outreach supporting both local and global initiatives and charities.
· Social committees and sports teams.
· Discounts for local vendors and events, including auto supplier discounts.

WAREHOUSE II- AFTERNOON SHIFT – Monday-Thursday 15:30-02:00 HOURS

The below positions needs to be filled:

1 cycle counter, 2 receiving, 6 MHE picking/replenishment. These roles are same level as Warehouse Worker II - MHE.

• A Warehouse Associate II impacts the organization by meeting specific operational key performance indicators. This experienced employee has a general knowledge of warehousing terminology and practices. This position is responsible for warehouse functions including, but not limited to, unloading, sorting, picking, kitting, packing, shipping and cycle counts and may be responsible for multiple accounts. The person in this position may use PC-based warehouse management systems to track packages, confirm shipments, print labels and perform inventory counts. The Warehouse Associate II may use RF Scanners, carts, pallet jacks and/or forklifts. This employee may have direct customer and vendor contact and works under supervision by the Warehouse Lead or Supervisor.

• Receive and inspect small pack deliveries from multiple carriers and disperse shipments throughout the warehouse, OPS Office and District Office accordingly

• Completion of required QA documents (Vehicle Inspection Record) as per client’s requirements

• Scanning of all incoming parcels and obtaining signatures for all deliveries

• Put away product in correct location based on SOPs.

• Receive returns, count and confirm quantities, determine condition and complete paperwork (e.g., separate invoices and match to bills).

• Obtain orders, prioritize if necessary, and select products from the proper locations.

• Obtain and properly match up reprinted orders.

• Verify accuracy of orders picked, including product name and size, product code, lot number, expiration date, and quantity.  Escalate concerns to Lead or Supervisor.

• Stage and securely pack product based on SOPs.

• Place the appropriate documentation with each order and ensure all cases are clearly labeled and accurately marked (e.g., pick/pack slips, refrigerate stickers).

• Arrange for pick-up of shipments, contact carriers for ETA, and coordinate schedule.

• Handle products and perform duties according to client procedures, GMP/SOP and government/compliance regulations.

• Palletize cases, wrap, and load skids onto trailers.

As a member of the BGIS Sustainable Cleaning Solutions Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations.

Key Responsibilities:

Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming.
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions)
• Strip and finish hard surface floors manually or with power equipment (when required).
• Steam clean or shampoo carpets (when required).
• Transport garbage from drop points to garbage bins or compactor.
• Transport maintenance machinery, where necessary, between floors and job sites.
• Cleans and stores equipment and machinery used.
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach.
• Cleans washroom floors including stripping and finishing.
• Cleans stairwells and elevator cabs where ladders are required.
• Loads and unloads supplies and replenishes cleaning solutions.
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
• Other duties that management may assign.
• Notify managers concerning the need for major repairs or additions to building operating systems.
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals (when required).

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials, and solutions.
• Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients, and the general public.
• Ability and willingness to work weekends, holidays, and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable.
• Must have a valid Class G license (may be required).

Physical demands:

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• The employee must occasionally lift and/or move up to 25 pounds.

Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

•    Provides observations about facility, facility mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency
• Knowledge and understanding of Building Automation Systems (BAS)
• Knowledge and understanding of HVAC Systems 
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Hold a valid driver's license

Licenses and/or Professional Accreditation (one of the following bullet points)

• Building Operator Certification or equivalent through an accredited institution required
• Provincial HVAC or apprentice license (ex: Gasfitter I & II license  refrigeration license, etc.)