All jobs within 100 km around Ingersoll

Responsible to perform PSAs (Potential Supplier Audits), responsible to close out PSA audit short falls.  Responsible to manage the APQP process to support program launches.  Responsible to develop and continually improve our Engineering Feasibility documents to include lessons learned by commodity/component.  Support supply crisis situations related to capacity and quality.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·       Ensure compliance with all legislative requirements in the facility’s geographic location and:

o   The Global Operating System Plays;

o   OHSAS 18001:2007 Health and Safety Management system standard;

o   ISO 14001:2004 Environmental Management System standard;

o   IATF/TS16949 Technical Specification Management and Linamar Quality Basics System standards.

·       Support, Foster, Promote and Demonstrate Linamar’s Core Values and Leadership Behaviors.

·       Maintain balance between customer, employee, and financial satisfaction by maximizing facility/department Performance Indicators (Linamar Supplier Scorecard System).

·       Supply Management including APQP, Launch, PSA’s and crisis management.

·       Maintain effective communication with internal and external customers to ensure program requirements are met.

·       Interpret regulatory quality documents in order to apply them to manufacturing and quality systems.

·       Be actively involved in quality planning of the supply base (Control Plans, APQP, FMEA, PPAP, MSA).

·       Identify gauging methods required for the supplier to ensure quality requirements are met.

·       Participate & lead in APQP meetings.

·       Initiate and participate in 8D Problem solving meetings with suppliers.

·       Review accuracy of process documentation and update as required.

·       Supplier development activities (Prototype running, pre-production process analysis, run at rate on site, early containment evaluation, process production release).

·       Part Readiness follow up and support.

·       Safe launch assurance and/or red launch follow up and solution.

·       Follow up on lessons learned matrix and read across, ensure added to engineering feasibilities by commodity/component.

·       Willingness to travel as needed.

Credentials

·       A bachelor’s degree in engineering or related engineering discipline is required.

Desired Characteristics

·       Five to seven years of related experience.

·       Experience with risk analysis and problem failure modes and effects analysis (FMEA) for automotive products.

·       Experience in writing and executing engineering test protocols.  Write quality assurance reports that describe manufacturing problems, corrective actions taken, and preventative measures needed.  Proposals are usually written for non-technical audiences such as clients and management.

·       Ability to make presentations to senior management during annual meetings to provide an overview of areas such as product costing, maintenance and equipment failures which need to be considered when planning for the coming year.

·       Read operating and quality assurance reports to understand technical and operational information about facilities, processes, and equipment.

·       Experience in drawing interpretations and geometric dimensional tolerancing.  Knowledge and experience in gauging methods, calibration, and gauge R&R’s.  Ability to take precise measurements using specialized equipment and techniques.

·       Lead and co-ordinate project teams which include other engineers, technologists, clients, and contractors when designing, developing, and building products or facilities.

·       Proficient with MS Office and CAD applications. Familiar with material processes and IATF/TS16949 standards.  Experience with the use of statistical analysis software and computer-assisted design, manufacturing, and machining.

·       Attend formal professional development seminars and conferences as needed.  Conduct self-directed studies by reading journals and trade publications.  Must be aware of new technologies and advances in the engineering field.

What Linamar Has To Offer

·       Opportunities for career advancement.

·       Community based outreach supporting both local and global initiatives and charities.

·       Social committees and sports teams.

·       Discounts for local vendors and events, including auto supplier discounts.

Our branded retail team is at the heart of our success. We represent the welcoming spirit of our company. Our retail teams are outgoing and approachable individuals who understand how our products and services fit into everyday life, and we’re excited to show customers how that technology can enhance and simplify their lives. We deliver a seamless experience, value expertise, dedication, and commitment to doing what’s right for our customers needs, every time.

At Rogers, we believe in fostering an environment that inspires personal growth, building careers, and creating an inclusive future for everyone.  If you’re passionate about technology, enjoy connecting with people, and thrive in a supportive team environment, consider exploring the following opportunity!

What does it mean to join our Rogers Team?

At Rogers, our retail team is the heart of our success.  Our Sales Associates are outgoing and approachable team members who understand that our customers rely on technology to enhance and simplify their lives and stay connected.  We are excited to show customers how our latest products and services can help, delivering best in class customer experiences in our retail stores

As a Sales Associate, you can expect to:

• Enhance the retail experience in our stores, by providing best in class service and value-added solutions to our customers

• Promote Rogers & Fido brands, including Rogers Mastercard  
• Engage and grow your customer base with personalized communication and outreach to customers via phone calls and business text messaging
• Participate in community events and outreach efforts to support local small businesses.
• Operate with a creative spirit that can adapt to an ever-changing environment while enjoying the thrill of hitting sales goals

What’s in it for you:

• Competitive compensation plus commissions
• One of the best flex health benefits, RRSP, TFSA and Pension plans in Canada
• Mental Health and Support benefits- 100% coverage
• Employee and Family Assistance Program benefits
• Employee discounts that can offer up to 50% off our Rogers & Fido products and services
• A commitment to fostering an inclusive and diverse workplace where all our team members can bring their whole selves to work
• A flexible schedule, including evenings & weekends (Min 20 hours/week)
• Career growth and development opportunities

What we’re looking for:

• You are great with people and are passionate about delivering an exceptional customer experience
• You love being part of a team and are a great collaborator
• You are excited and inspired by technology

• You meet the minimum age of majority in your province 

After you apply, watch your email

Candidates will be required to complete an online assessment as a next step.  If you are selected to move forward in the process, our recruitment team will reach out to you discuss the position further.  Successful candidates will be required to provide consent for and pass Background Check requirements.

To protect our people, brand and assets, a pre-employment background check will be conducted. As part of our selection process, all candidates must clear a criminal/credit background check and ID verification. Previous employment verification may be required depending on the role.

Schedule: Part time
Shift: Variable
Length of Contract: Not Applicable (Regular Position)
Work Location: 435 Stone Rd W., P9 (5388), Guelph, ON
Travel Requirements: Up to 10%
Posting Category/Function: Retail (In Store / Hourly) & Sales and Service
Requisition ID: 316855

Facility Location- Hamilton  

Work Location - Hamilton 

Employee Type -  Regular Employee FT  Hourly 

Shift/Hours –  Afternoons - 1pm-9:30pm - Monday-Friday

Pay - $34.59 per hour

Salary range: $88,823 to $115,930. Salary offers will vary commensurate with experience, education, skills, and training.

Overview of the Role

Reporting to the Regional Director, Human Resources – Ontario, the Human Resources Manager is responsible for the promotion of the Company's values and culture, operational and strategic Human Resources (HR) activities related to all aspects of employee relations for our Tavistock and St. Marys locations.

How you will make contributions that matter:

• Designs and executes HR solutions that align with facility priorities, while ensuring the HR objectives of the Canadian division are achieved;
• Support, coach and empower the management team and HR team and act as a business partner for all HR related activities;
• Build and foster relationships with employees which uphold Company culture and values;
• Develop analysis information (KPIs) and recommendations on HR practices and procedures;
• Maintain regular floor presence to promote positive employee relationships;
• Collaborate with managers and employees related to disability management, group benefits, compensation, etc.
• Champion all communications, HR updates and directives;
• Lead all HR related training; including employee onboarding.
• Other duties as assigned

You are best suited for the role if you have the following qualifications:

• University degree/college diploma in human resources management or a related field;
• CHRP designation is an asset.
• 1 to 3 years of management level experience; ideally in a manufacturing or warehouse environment;
• Working knowledge of human resources and applicable laws and regulations related to benefits, pay and health and safety.
• Experience with HRIS, Workday preferred;
• Be team-oriented while being able to work independently.
• Strong interpersonal, communication and leadership skills.

We support and care for our employees and their families by providing:

• Competitive salaries
• Advantageous corporate agreements
• Full range of group insurance benefits
• Group retirement pension plan with employer contribution
• Purchase option of company stocks
• Group RRSP
• Health and wellness program in the workplace
• Assistance program for employees and their families
• Saputo products at a discounted price

We support employment equity. Saputo strives to embed diversity and inclusion in its operations and invites candidates from all horizons to join its family.

Working on the line you will machine parts and perform quality checks in a timely manner. These positions require shift work and the ability to work overtime.
 
Powering Vehicles, Motion, Work, and Lives since 1966.

About Linamar

Linamar Corporation is a Canadian global manufacturing company, offering stability and advancement opportunities.

We Offer
 

• Comprehensive Benefits and Pension Packages
• Career Advancement & Training Opportunities
• Shift Premiums & Production Bonus
• Personal Protective Equipment Allowance

Requirements
 

• Previous Manufacturing experience is an asset
• Ability to work all rotating shifts
• Ability to work overtime as required
• Must be willing to learn
• Work independently and as part of a team
• Must be 16 years of age to work on the shop floor

Why Linamar
 
 

• Opportunities to grow your career
• Community based outreach supporting both local and global initiatives and charities
• Social committees and sports teams
• Discounts for local vendors and events, including auto supplier discounts

The Janitor position is responsible for cleaning and maintaining the interior and exterior of building, facilities and the surrounding grounds. Additional responsibilities include removal of waste and recycling containers and maintain sanitary conditions to ensure employee safety.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

·    Empty garbage and recycling bins in office and plant.
·    Clean & sanitize all washrooms, cafeterias, and kitchenettes per housekeeping plan.
·    Operate industrial vacuum cleaners to remove scraps, dirt, heavy debris, and other refuse.
·    Sweep, mop, and scrub hallways, floors, and stairs.
·    Maintain outside company property. Eg: garbage pickup, window cleaning (lower levels only).
·    Work in conjunction with maintenance personnel as needed.
·    Maintain janitorial inventory levels. 
·    Operate floor scrubbing machine in the plant area.
 

Credentials

·    High School Diploma or equivalent general election.
·    Previous cleaning or janitorial experience considered an asset.
·    Ability to read and understand Workplace Hazardous Materials Information System (WHMIS) labels on products to understand applicable safety cautions.
 

Desired Characteristics

·    Ability to handle complaints and respond to emergency situations.
·    Ability to work independently but coordinate work schedules with others.
·    Good manual dexterity.
·    Attention to detail.
·    Clear and concise communication skills.
·    Able to interact with Supervisor to provide and receive job-related information, assess cleaning situations.
 

What Linamar Has To Offer

· Opportunities for career advancement.
· Community based outreach supporting both local and global initiatives and charities.
· Social committees and sports teams.
· Discounts for local vendors and events, including auto supplier discounts.

As a member of the BGIS Sustainable Cleaning Solutions Team, you will be generally responsible for cleaning in a designated zone with an emphasis on quality control, health and safety & striving to exceed client expectations.

Key Responsibilities:

Functioning as a core member of the operational team and reporting to the Manager/ Supervisor as a Cleaner you may be required to perform some of the following tasks as required by the Manager/Supervisor and needs of the client:

• Clean floors by sweeping, scrubbing, or vacuuming.
• Dry/wet mop (wash/scrub) and polish hard surface floors. (The washing/scrubbing of floors is done with handheld or auto scrubbers. In large open applications, automatic equipment may be used to perform these functions)
• Strip and finish hard surface floors manually or with power equipment (when required).
• Steam clean or shampoo carpets (when required).
• Transport garbage from drop points to garbage bins or compactor.
• Transport maintenance machinery, where necessary, between floors and job sites.
• Cleans and stores equipment and machinery used.
• Cleans glass areas requiring ladders, scaffolding or other extension equipment to reach.
• Cleans washroom floors including stripping and finishing.
• Cleans stairwells and elevator cabs where ladders are required.
• Loads and unloads supplies and replenishes cleaning solutions.
• Follow procedures for the use of chemical cleaners and power equipment to prevent damage to floors and fixtures.
• Other duties that management may assign.
• Notify managers concerning the need for major repairs or additions to building operating systems.
• Remove snow and debris from sidewalks, driveways, or parking areas, using snowplows, snow blowers, or snow shovels, or spread snow melting chemicals (when required).

Job Requirements:

• Experience in performing various cleaning, housekeeping and maintenance activities in an institutionalized environment.
• Experience in using floor maintenance machines, cleaning equipment, materials, and solutions.
• Knowledge of the Occupational Health and Safety Act and the provisions that apply to this work including WHMIS.
• Ability to lift, push and pull heavy items as well as climb ladders.
• Excellent interpersonal skills with the ability to maintain cooperative working relationships with staff, clients, and the general public.
• Ability and willingness to work weekends, holidays, and shifts as assigned as well as work in multiple locations.
• Ability to follow verbal and written instructions, prepare and maintain manual and electronic records.

Licenses and/or Professional Accreditation

• Must meet security clearance requirements, where applicable.
• Must have a valid Class G license (may be required).

Physical demands:

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• The employee must occasionally lift and/or move up to 25 pounds.

The Bilingual Customer Service Representative provides customer service and front line support to clients with respect to the maintenance and operations of their buildings. Specific responsibilities include but are not limited to handling inbound service requests received via telephone, email and web interface and initiating work orders to support timely fulfillment and resolution of client requests.

The Operations Centre is a critical environment within BGIS Canada, responsible for receiving and dispatching facilities service requests for its clients – 7/24/365. The work environment is fast-paced and client-service focused.  In order to ensure ongoing performance success, Operations Centre team members are measured against service delivery metrics.

The Customer Service Representative is required to provide service in English and French. 

 KEY DUTIES & RESPONSIBILITIES

• Learns client account details, the service request/work order management systems, the telephony system and Operations Centre policies, processes and operating procedures
• Fills basic client requests including creating and dispatching work orders to appropriate internal and external service providers and relaying appropriate information to front line facilities managers
• Assesses and accurately assigns level of priority to facilitate timely fulfillment of service requests
• Learns techniques for troubleshooting service issues, communicating with internal technicians and Facility Managers, external service providers, landlords and other relevant parties.
• Receives guidance and support in completing service requests including activities such as proper work order processing, dispatching and communication of information.
• Provides customer service support in either English and French
• Participates in program initiatives undertaken by the Operations Centre
• Maintains confidentiality of client account information and other confidential information. Conducts work in a professional manner.
• May be required to demonstrate Operations Centre capabilities to potential and existing clients and to prospective hires by having such people Y-cord into live calls.
• May be required to provide training to new Team Members.
• Other duties as assigned.

Work Hour Availability Requirements

• 7 days a week, 24 hours a day, 365 days a year environment requiring open availability
• Rotating shifts between 6:00am and 11:00pm
• Weekends and holiday work availability on a rotational basis
• May be required to work overtime

KNOWLEDGE & SKILLS

• High school completion plus a specialized technical or business course.
• Job Related Experience:  One year or less
• Demonstrated language proficiency (both verbal and written), including proper grammar, spelling and punctuation. Clear and effective communication skills.
• Basic understanding of the facilities/property management industry and knowledge of facility operations and maintenance, an asset.
• Strong customer-service orientation and customer service skills.
• Demonstrated ability to learn new processes, tools and other relevant information quickly, with proven ability to apply learning to the job.
• Ability to work in a fast-paced, multi-client environment with ability to apply various client-specific business processes to individual service request situations.
• Demonstrated ability to gather information, accurately assess issues and assign level of priority; effective probing and problem solving skills.
• Demonstrated organizational skills.
• Ability to sustain concentration over a prolonged period of time and pay attention to details.
• Demonstrated computer proficiency including solid keyboarding skills.
• Demonstrated personal leadership attributes incorporating a commitment to ongoing development and continuous learning.

Licenses and/or Professional Accreditation

• None required.

Every member of our warehouse team is an integral part of our business. They ensure every order is staged and delivered to our customers in a timely manner while helping maintain our Warehousing cleanliness and inventory.

What’s in it for you?

• Full health care benefits starting day one.
• Career development and training opportunities
• Comprehensive benefits with premiums fully paid for by the company for the “Core” package.
• Life insurance, disability and wellness programs
• Retirement savings programs including RRSP and DC pension with up to 5.25% employer contribution
• Paid vacation and sick time and day off on your birthday!
• Bonus programs that include annual performance and profit sharing
• Employee discounts on top brands of plumbing and HVAC/R products
• Education reimbursement for employees
• Employee referral program
• Safety shoe reimbursement

What you will do:

• Loading and unloading product in a timely manner to meet delivery deadlines and customer commitments
• Receiving incoming shipments and checking for accuracy
• Put away product to correct areas in the warehouse in a timely manner
• Picking, packaging and shipment of customer orders, including preparing documentation for shipment
• Liaising with freight companies and inside/outside customers to determine shipping priorities
• Ensuring good housekeeping and safety procedures are maintained in shipping area

What you will bring:

• Previous warehouse experience required
• Knowledge of industry products is an asset
• General basic computer skills including Microsoft Office is required
• Exceptional customer service and communication skills
• Must be dependable and reliable and willing to take initiative
• Able to regularly lift (up to 50lbs pounds)
• Forklift certified or ability to be certified
• WHMIS and TDG certification would be an asset