All jobs in Maintenance & Repair

WHAT YOU NEED TO KNOW

• Language Requirement: English oral, reading, writing       
• Police Record Check: The successful candidate will be required to complete a Criminal Records and Judicial Matters Check with the Police Services detachment in their jurisdiction to the City of Ottawa’s satisfaction.; Police record checks completed by a third-party company will not be accepted.  
• You may initially be paid 95% of your starting rate of pay, in accordance with the collective agreement.
• Please save a copy of the job poster. Once the closing date has passed, it will no longer be available. 

We wish to thank all applicants for their interest and effort in applying for this position. Only candidates selected for interviews will be contacted. 

The HVAC/Refrigeration Technician has experience and holds a valid Certificate of Qualification issued by the province in which the work is performed. The incumbent is responsible for operating facility systems, performing preventative and corrective maintenance, routine services on facility mechanical and other systems for the assigned facility within the limits of company policy and trade certification. The Technician is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, security and fire protection.

Trades certification or license:

• HVAC/Refrigeration license is required
• Gasfitter I & II license is an asset

This is an on-site stationary position located in Downtown Vancouver near Grandville St & W Hastings St. This position is full-time Monday to Friday, with rotational emergency on-call. 

KEY DUTIES & RESPONSIBILITIES

Installation & Troubleshooting

• Installs air conditioning, heating, and related equipment and components.
• Overhauls and services air conditioning, heating units and systems.
• Repairs, replaces and adjusts worn or broken parts HVAC equipment.
• Repairs and adjusts valves, piping connections, fittings, and couplings.
• Diagnoses and troubleshoots problems with heating and air conditioning units and systems.
• Installs motors, thermostats, and humidistats.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance activities at assigned facility.
• Performs regular monitoring, inspection, preventative and corrective maintenance to ensure facility uptime and safety objectives are met, uninterrupted client operation and asset integrity of assigned facility is maintained.
•  Monitors assigned facility by conducting facility walkthroughs, mechanical and electrical equipment and systems monitoring. 
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documentations are maintained.
• Maintains accurate inventory of all assigned tools/equipment and arranges for repair and replacement where required.

Client Relations

• Provides observations about facility, facility mechanical conditions and deficiencies and provides recommendations for enhancement and repair. 
• Participates in and assists with facility-related projects.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned
   

KNOWLEDGE & SKILLS

• College Diploma/Certification required
• Experience required as a licensed HVAC/Refrigeration Technician
• Strong ability to adhere and to properly execute processes and practices relating to facility operations and maintenance
• Ability to maintain building mechanical and other system troubleshooting and resolution skills
• Current knowledge of fire, life, safety and building codes and standards and ability to research and apply related codes and standards
•  Possesses a strong environmental, health and safety mindset. Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technicians development
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must be willing to wear Personal Protective Equipment 
• Must meet enhanced security clearance requirements
• Valid drivers’ license may be required
   

Trades certification or license:

• HVAC/Refrigeration license is required
• Gasfitter I & II license is an asset

This is a regular, full-time position with a salary range of $38.55 - $45.35 per hour. The starting salary will be based on the successful candidate’s competencies, including but not limited to experience, education and performance related to this role.

The electrician is responsible for performing preventative and corrective maintenance, routine and on-demand services on facility mechanical and electrical equipment and systems for the assigned facility. The electrician is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

At this position level:

• Performs preventative and corrective maintenance on facility mechanical and electrical equipment and systems
• Trades certification or license in one or more of the following - required:
  • Journeyman level Electrician license (must be a member of the CCQ)

KEY DUTIES & RESPONSIBILITIES

Subject to legislative licensing requirements and company policy:

• Performs work in accordance to established processes and practices
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection
• Performs regular facility, facility mechanical and electrical equipment and systems monitoring and inspection, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained
• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides recommendations for enhancement and repair
• Monitors assigned facility by conducting facility walkthroughs, mechanical and electrical equipment and system monitoring and inspection
• Maintains, troubleshoots and repairs mechanical and electrical building systems and equipment
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on  facility mechanical and electrical equipment and systems
• Records resolution data within service maintenance management database.  Ensures work completed meets quality, contract response and all other requirements
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Assists in the implementation of preventative maintenance (PM) program.  Ensures that deficiencies are identified, recorded and escalated, and that related documentations are maintained
• Participates in facility-related projects
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis
• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered
• Other duties as assigned

Work Requirements

• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must be willing to wear personal protective equipment

Major Responsibilities:
 

Under the supervision of the Captain, the Deckhand is required to perform duties of a varied nature on a vessel which include:
 

• Assists in docking/undocking operations.
• Handles mooring lines and assists in the mooring of vessels.
• Performs general maintenance and related work as assigned on vessels, ramps and docks.
• Assists passengers getting on and off the vessel, and crowd control.
• Participates in vessel emergency drills and exercises per assigned duties.
• Provides information to the public and responds to public enquiries.
• May be required to load and unload freight.
• May be required to collect tickets from passengers boarding the vessel and counts passengers, when required.

Key Qualifications:
 

Your application must describe your qualifications as they relate to:
 

1. Experience and versatility on Marine Vessel.
2. Must be in possession of and maintain a valid MED (Marine Emergency Duty Certificate) or STCW Basic Safety Certificate.
3. Must be in possession of and maintain a valid Marie Basic First Aid.
4. Must be in possession of and maintain a valid Marine Medical Certificate.

You must also have:

• Ability to handle freight and assist passengers boarding and leaving vessel.
• Ability to deal tactfully and effectively with the public.
• Must be familiar with the Occupational Health and Safety Act and the Marine Occupational Safety & Health (MOSH) regulations that apply to this work.
• Must be physically capable of performing lifesaving and emergency duties.
• A Certificate of Fitness as prescribed by Transport Canada may be required.
• Must be able to work in all weather conditions.
• Must be available to work shift/weekend/overtime.

We thank all applicants and advise that only those selected for further consideration will be contacted

Overview

KLEAN-RITE DKI, in Grande Prairie, Alberta is now hiring a Permanent Full-Time Cleaning and Maintenance Supervisor position.

Duties Includes:

• Supervise and coordinate the work of light duty, specialized cleaners and janitors
• Inspect sites or facilities to ensure established safety and cleanliness standards are met
• Recommend or arrange for additional services required such as painting, repair work, renovations or replacement of furnishings and equipment
• Train cleaning staff
• Prepare work schedule and coordinate activities with staff
• May perform certain cleaning duties.

Wages and Benefits: Hourly wages of $ 35.40 to 40 hours work per week. Group Health and Dental.

Work Experience: Previous experience in a particular area of cleaning is usually required and previous supervisory experience may be required. Have a strong command in English language both in oral and written communication.

Education: Completion of Secondary School is usually required.

Qualified applicants must send resume by mail to the Office Manager at Klean-Rite Ltd. 9903 112 Avenue, Grande Prairie, T8V 1V5, alternatively, may send resume by email at [email protected]

Required languages: English

Education level: Completion of Secondary School is usually required

Required skills: Previous experience in a particular area of cleaning is usually required and previous supervisory experience may be required. Have a strong command in English language both in oral and written communication.

Closest intersection: 9903 112 Avenue, Grande Prairie, T8V 1V5

Main Purpose and Function
The Fleet & Manufacturing Services supports the City of Vancouver in being a service provider in all aspects of Fleet Management. The expertise and knowledge provided to internal and sometimes external clients by the Fleet& Manufacturing Services Branch includes: Engineering, Vehicle Procurement, heavy-duty/Commercial/Automotive Maintenance and Repair, Quick Service Repairs, Machining, Mill Work, Fabrication,Vehicle Outfitting, Carpentry, Body Shop Vehicle Repair and Painting, Product Inventory/Ordering, and Small Equipment Repair. The vehicle fleet includes but is not limited to: Police, Fire, City of Vancouver issued vehicles, Garbage and Recycling trucks. As an Automotive Service Technician, you will be responsible for the maintenanceand repair of this extensive fleet of vehicles and equipment which has a replacement value of $175 million dollars.

This position currently works on a 9-day fortnight schedule. Successful candidates will work on the afternoon shift, from 3:10 pm to 12:34 am, Monday to Friday. Employees may be assigned to work alternative shifts and locations based on operational requirements.

Specific Duties and Responsibilities
Fleet servicing occurs primarily at the fully equipped Garage at Manitoba Yard which houses an employee base of approximately 150 employees from various Trades but also at several satellite facilities. As an Automotive Service Technician, you will work with members of the Fleet & Manufacturing Service team to ensure that quality andtimely work is performed to support and service our clients. A major part of this position will be to support the outfitting/up-fitting of new vehicles, including completing approved modification requests. Preference will be given to candidates who have knowledge and experience in; the installation of components, reading and creating electrical schematics, ability to build, design and troubleshoot electrical systems, and any practical experience in building fleet vehicles to meet customer’s needs. The challenge this busy environment offers is in the variety of work, from small and heavy equipment to automobiles and light to heavy trucks, as well as Plant and Facilities maintenance, Manufacturing and Building maintenance.

The City of Vancouver supports continued education and development in areas of interest for all of its employees.Fleet & Manufacturing Services provides great opportunities for training including dealer training on newly purchased fleet equipment. We are always looking to provide employees with training to develop skills,knowledge, and abilities.

Qualifications
Education and Experience:

• Automotive Service Technician Certificate of Qualifications (T.Q.), Inter-Provincial Red Seal Endorsement.
• Red Seal certification is preferred.
• Completion of Grade 10, supplemented by technical courses related to the work.

Knowledge, Skills, and Abilities:

• Thorough knowledge of the standard practices, methods, materials, tools and equipment used in the automotive and mechanical trade.
• Thorough knowledge of braking systems.
• Considerable knowledge of the hazards and proper safety precautions of the trade.
• Ability to perform a variety of complex skilled electrical and mechanical tasks in the overhaul, repair, maintenance and adjustment of motorcycles, automotive and marine electrical systems.
• Ability to understand and effectively carry out oral and written instructions which may be accompanied by sketches and diagrams.
• Ability to interpret manufacturers' instructions and diagrams pertaining to equipment.
• Ability to requisition parts and materials.
• Ability to operate vehicles and heavy-duty equipment.
• Ability to plan, assign and supervise one or more subordinates.
• Ability to inspect and test City vehicles for road worthiness, following prescribed provincial standards.
• Skill in the use and care of tools and equipment employed in the trade.
• Agility, muscular coordination, and sufficient strength to permit the performance of heavy manual labour.
• Superior mechanical aptitude.

Driver’s License and Record Checks:

• A current and valid Class 5 BC Driver’s License or higher and a Satisfactory National Safety Code driving record.
  • No more than 2 infractions in 2 years or no more than 4 points in 2 consecutive years.
  • 3 years accumulation of no more than 2 preventable work related driving or equipment operating accident in any single year.
• Candidates must attach the following to be considered:
  • Commercial Driving Records Abstract (N Print) for the past 3 years (no more than 14 days prior to this posting)
  • Insurance and Claims History for the past 3 years (no more than 14 days prior to this posting)

Business Unit/Department: Engineering Services (1300) 

Affiliation: CUPE 1004 N/Pks 

Employment Type: Regular Full Time 

Position Start Date: February, 2025  

Salary Information: Pay Grade GR-377: $48.76 per hour

Application Close: January 21, 2025

This position maintains a diverse range of equipment including delivery vehicles, heavy duty machinery, on road tractors, and trailers from a variety of manufacturers. This position troubleshoots and maintains/repairs various systems including hydraulic brakes, air brakes, electronics, and engines. This position performs other tasks as requested.

• Job Type: Full-Time - Permanent Position
• Work Location:  Lachine
• Workdays: Monday to Friday
• Shift duration: 7:00 pm – 3:30 am 

Responsibilities:

• Repairs all UPS package cars and equipment.
• Maintain a clean and organized workspace
• Use diagnostic tools and software to identify mechanical problems
• Ensures all vehicles are maintained regularly and in a timely manner
• Communicate effectively in a team work environment
• Performs routine PMI (Preventive Maintenance Inspection) and Maintenance repairs.

Qualifications and or Requirements:

• Bilingual
• Ability to lift 70 lbs./32 kgs.
• Valid driver's license and clean driving record (Required)
• Must be able to work Monday - Friday (7:00 pm – 3:30 am) (require)
• Strong knowledge of mechanical, electrical and electronic components of vehicles
• Excellent problem-solving skills and attention to detail
• Ability to work in a fast-paced warehouse environment and occasionally outdoors
• Possession of essential hand tools. Such as pneumatic tools and more.(required)
• must possess of a PEP card heavy duty or light duty mechanic license. (required)
• Must be able to Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday 
• Able to pass a Safety Road Test

Compensation and Benefits:

• $31* per hour
• Unionized role with a Defined Benefit (DB) pension plan
• Weekly pay (paid every Friday).
• Paid vacation: 2 weeks on start of service year, 3 weeks after 5 years of service, 4 weeks after 10 years of service, 5 weeks after 20 years of service, 6 weeks after 25 years of service
• Group Benefits (Dental and Extended Medical)
• Defined Benefit Pension Plan
• Immediate access to UPS Employee Discount Program upon hire.
• EAP (Employee Assistance Program)
• Opportunities for future growth within a Fortune 50 company.

Working Conditions:

• Mainly indoors (in a warehouse or shop). Occasionally work outdoors.
• Exposed to hot/cold and variable temperatures when working both indoors and outdoors.
• Wear a UPS Auto Mechanic uniform and adhere to the company’s Appearance Guidelines.

The General Repair Technician II is a mid-entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility technical and non-technical component monitoring and inspection.
• Responds to routine service requests and performs preventative and corrective maintenance.
• Operates facility mechanical, electrical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

KNOWLEDGE & SKILLS

• High school diploma or equivalent
• Minimum 3 years of facility operations and maintenance work experience
• Knowledge of processes and practices relating to facility operations and maintenance
• Ability to maintain, troubleshoot and repair non-technical facility components
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
• Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards
• Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Basic knowledge and understanding of Building Automation Systems (BAS)
• Ability to read understand and interpret technical drawings and information
• Computer literacy
• Demonstrated maintenance and repair skills
• Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise
• Must be willing to wear personal protective equipment
• Must meet enhanced security clearance requirements
• Valid drivers’ license

Licenses and/or professional accreditation 

• Demonstrate an interest in obtaining a diploma or a certificate or be in the process of obtaining one.
• Meet the requirements for a higher security clearance.
• Any one of the following are considered an asset:
  • Building Operator Certification or equivalent through an accredited institution preferred
  • Building Systems Maintenance Certificate (SMC)
  • Systems Maintenance Administrator (SMA)
  • Systems Maintenance Technician (SMT)
  • Facilities Technician Certification
  • Working towards a trade license, an asset
  • Working towards Building Environment Systems (BES) Operation Class 1

The Gauge Technician position, under general supervision, is responsible for calibrating, testing, setting up, and repairing various controls, instruments, and gauges measuring all types of variables (these may include dimensional, magnetism, NDT, mechanical properties, metallurgical, or weight). In addition, may disassemble instruments and examine various components for problems and repair gauges or send for applicable repairs.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

Clean, repair, and set up gauges for shop floor (micrometers, vernier, dial indicators, digital indicators), etc.

Calibrate company and employee gauges, inspection equipment.

Maintain computerized system of gauge inventory, calibration dates, calibration history and gauge location, gauge R and R dates and history.

Arrange for the calibration and repair of all gauging and inspection equipment not maintained internally.

Order gauges and equipment as needed and work with Quality Engineers to develop Gauge Plan on new programs.

Maintain inventory of archived/quarantined gauges no longer in current use.

Maintain and update a gauge calibration laboratory scope.

Maintain relations with gauge suppliers.

Write PO for inspection equipment.

Drawing interpretations, including GDT.

Update inspection documentation due to engineering changes, including Gauge Instructions.

Maintain effective communication with managers, supervisors, engineering and production employees.

 Assist in the training of employees of proper use of gauges and inspection equipment.

Coordinate Measurement Systems Analysis (MSA) including Gauge Repeatability and Reproducibility (GR&R) studies.

Review quality control data and statistical data in order to examine trends.

Ability to assess severity of deviations of machined parts from specifications to determine approved inspection.

Credentials

High School Diploma or equivalent general education.

Minimum two years of previous related experience.

Metrology, SPC, Q.C. courses.

Possess Gauge Metrology certificate.

Trained on GAGE Calibration software.

Use computer-assisted design, manufacturing and machining software

Ability to interpret scale drawings at various points throughout machining processes.

Able to operate Zeiss CMM Contrua for calibrating masters in house. 

Knowledge of Statistical Analysis as it relates to gauging systems and inspection equipment.

Knowledge and experience with Measurement Systems Analysis (MSA – AIAG).

Desired Characteristics

Possess good communication skills to discuss work plans and coordinate tasks with other technicians to complete large orders. 

 Ability to work independently and in a team when needed.

Continuously keep up-to-date with new technologies, products and trends within the machining industry. 

What Linamar Has To Offer

Opportunities for career advancement.

Community based outreach supporting both local and global initiatives and charities.

Social committees and sports teams.

Discounts for local vendors and events, including auto supplier discounts

As a member of the Maintenance team, the Millwright is responsible for the routine/preventive maintenance and troubleshooting of the manufacturing equipment, building and Building Equipment. This is a full-time relief position, when not relieving the home shift is Wednesday - Saturday 6:45 AM to 4:15 PM.

Schedule: Relief with home shift; Wednesday - Saturday 6:45 AM to 4:15 PM

Wage: $51.24/hour

We support and care for our employees by providing them with…

• Competitive salaries

• Advantageous corporate agreements

• Full range of group insurance benefits

• Group retirement pension plan with employer contribution

• Purchase option of company stocks

• Group RRSP

• Health and wellness program in the workplace

• Assistance program for employees and their families

• Saputo products at a discounted price

You are best suited for the role if you…

• Facilitate the timely and efficient processing and packaging of fluid products.

• Carries out preventative maintenance on assigned equipment.

• Trouble shoots and repairs equipment in breakdown situations to ensure production efficiencies are achieved.

• Provides training to plant staff as required.

• Works with other trades groups to complete project assignments.

• Works with vendors as required.

• Coordinates and assist in mechanical and electrical installations.

• Maintains/Programs plant PLCs (if qualified to do so).

• Keeping of proper HACCP documents, Sanitary and Preventative maintenance documents as required.

• Performance of other duties as required.

You are best suited for the role if you…

• Certified Journeyman

• Excellent mechanical skills and ability to carry out general plant/ equipment maintenance

• Food industry or high-speed packaging experience

• PLC training and experience would be an asset

• Demonstrate excellent trouble shooting skills and analytical skills

• Able to work independently with minimum supervisor and within an interdependent team

• A high level of self-motivation and initiative

• Proven proficiency and dependability in current position with a good safety record

• Able to work in confined spaces

• Some heavy lifting required