All jobs within 50 km around Kitchener in Maintenance & Repair

The Level 1 – Maintenance Labourer position, under the supervision and direction of the Maintenance Supervisor assist Millwrights and Maintenance Mechanics in day to day maintenance activities.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Maintain systems to track, report, document and assist with scheduled preventative maintenance.

· Record coolant refractometer readings, top up machine oils, and record usage.

· Manage oil and coolant inventories.

· Housekeeping of storage area for fluids.

· Operate forklift and floor scrubber.

· Maintain equipment in a safe and clean manner.

· Ability to use CMMS (computerized maintenance and manufacturing system).

· Ensure compliance of maintenance instruction sheets and procedures.

· Attend maintenance daily meeting.

· Measure various physical properties using common measuring tools such as rulers, tapes, thermometers and scales.

· Evaluate condition of parts and equipment.

· Assess the safety of work environments.

Credentials

· High School Diploma or equivalent general education.

· Minimum one year experience in manufacturing.

· Able to observe warning signs, such as scan phrases and icons on caution and warning signs to identify hazards in work areas.

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

Desired Characteristics

· Perform tasks independently under direct supervision.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Maintenance Supervisor position will be responsible for coordinating and supervising the activities of skilled and unskilled maintenance workers ensuring proper methods and procedures are followed to maintain, repair and service equipment, buildings and facilities in compliance with building codes and safety standards. Primarily accountable for maintaining production equipment in a manner that meets organization standards and ensure minimum equipment downtime. In addition, inspect projects to ensure conformity to specifications, direct safety inspections and preventative maintenance programs. This position is responsible for maintaining stock of inventory of materials, parts and specialized tools for the maintenance function.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Manage and direct the activities of employees and equipment in maintenance department in the absence of the maintenance manager.

· Effective employee relations including handling employee complaints, obtaining help and guidance for employee's with problems.

· Conducts monthly department meetings.

· Complete performance evaluations for all maintenance employees.

· Ensure appropriate parts and supplies are available.

· Maintain and direct all PM&PD activities.

· Maintain PMX software and all related documentation.

· Arrange for quotes from contractors in conjunction with maintenance buyer.

· Oversee, mentor and direct all staff.

· Department champion to ensure all contractors have appropriate documentation in order.

· Read completed inspection forms to ensure all maintenance, repair and inspection tasks have been adequately completed by workers.

· Study assembly drawings for equipment to determine what parts are required and how they go together.

· Establish work schedules and shift priorities and appointments to accommodate emergencies and cancellations.

· Develop and monitor detailed overhaul, repair and preventative maintenance schedules for shop tools, equipment and vehicles.

· Develop and monitor operating and project budgets.

· Assume a wide variety of roles to coordinate job tasks with those of junior workers, co-workers and subcontractors.

Credentials

· Completion of secondary school or equivalent general education.

· Journeyperson trade certification in a relevant trade considered an asset.

· MMP (Maintenance Management Professional) certification considered an asset.

· Minimum five years in a maintenance machining environment and two years as a supervisor or equivalent.

· Intermediate knowledge of all applicable Microsoft and other software applications.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

· Knowledge of fire alarm system:  Sprinkler, Ontario fire code.

·Automotive manufacturing experience required.

Desired Characteristics

· Ability to prioritize tasks to maintain efficiency.

· Ability to work independently to provide professional guidance and oversight.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

The Maintenance Mechanic is responsible for inspecting, maintaining, and replacing filters and performing minor preventative maintenance on heating, ventilation, and air conditioning (HVAC) equipment on all client sites to maintain efficiency and mechanical integrity of HVAC units. This position is well-suited for graduates of a college or other post-secondary programs in HVAC studies. Minimum G3 Gas License required, G2 preferred.

KEY DUTIES & RESPONSIBILITIES

Essential duties and responsibilities include the following. Other duties may be assigned.

All routine maintenance and inspection regardless of size of location of the mechanical equipment being inspected or maintained, where this work is done as a periodic routine service inspection maintenance procedure by the employer, limited to:

• Filter Changing and maintenance thereof
• All oil and greasing
• All belt adjusting or replacement
• Cleaning of cooling towers, coils, evaporator and condenser tubes and water treatment
• Delivery of parts and equipment
• General housekeeping
• In the area where a problem exists with non-union competition, the assignment of Maintenance Mechanics duties may be adjusted to meet local conditions in agreement with the Local Union Business Manager
• Cleaning, repairing and routine maintenance of solar energy equipment
• Helper for service and maintenance Journeymen and Apprentices, as long as the Apprentices are fully employed

KNOWLEDGE AND SKILLS

Must possess required knowledge and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• HVAC tools, materials, and safe work practices.
• Types of air filters.

SKILLS

 Must possess required skills and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• Maintaining an established work schedule.
• Effectively using interpersonal and communications skills.
• Effectively using organizational and planning skills.
• Maintaining HVAC equipment.
• Maintaining confidentiality of work-related information and materials.
• Establishing and maintaining effective working relationships.
• Manage the budget within assigned department.

EDUCATION

Minimum G3 Gas fitter certification is required

Must be a member of UA787

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as Other trades certificate or diploma
Experience: Candidates should have experience of 3 to less than 5 years
Area of specialization: Shutdown operations and troubleshooting
Equipment and machinery experience: Automated and robotic system, electrical and electronic controls, fans and blowers, heat exchangers, hydraulic system, industrial and stationary engine, lathes and other machining tools, pneumatic system, power tools, pumps and compressors, tool grinders, welding equipment, hand tools, and forklift
Own tools/equipment: Steel-toed safety boots
Credentials: Industrial Mechanic (Millwright) Trade Certification and Industrial Mechanic (Millwright) Red Seal Endorsement 

Physical Requirements:

• The candidates should be physically fit to handle a demanding workload, capable of working under pressure
• The candidates should demonstrate attention to detail and be willing to work overtime when required
• The candidates should be able to perform bending, crouching, and kneeling tasks, stand for extended periods, and handle weights up to 23 kg (50 lbs)

Other Requirements:

• The candidates should demonstrate excellent oral and written communication skills
• The candidates should be collaborative team players

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Benefits:

• The candidates will get free parking area

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
hr@thebamcogroup.com

Be prepared for the screening questions. Include answering the following questions while applying:

• Are you available for the advertised start date?
• Are you currently legally able to work in Canada?
• Do you currently reside in proximity to the advertised location?
• Do you have previous experience in this field of employment?
• Do you have the above-indicated required certifications?

Group Summary:

Minimum Qualifications:

• Licensed Electrician or equivalent electrical engineering certificate
• Completion of an industrial electrician apprenticeship program or equivalent  
• Minimum 5 years’ experience in the automotive industry as an industrial electrician
• Knowledge of electric circuitry of relay, PC and PLC logic.
• Working knowledge of the Canadian Electrical Code, Occupational Health and Safety Act, Lockout Policies and electrical, hydraulic, and pneumatic systems 
• Ability to perform basic wiring work, conduit bending and control cabinet wiring.   
• Ability to work with minimum supervision. 
• Good communications skills and must be able to communicate fluently in both written and spoken English.

Duties and Responsibilities:

• Safe Installation and repair of equipment

• Install, examine, replace and repair electronic wiring, receptacles, switch boxes, conduits, feeders, cable assemblies, lighting fixtures and other electrical components. 
• Test electrical and electronic equipment and components for continuity, current, voltage and resistance.
• Inform the Maintenance Manager about changes in electrical circuits and updates to the original diagrams
• Wire new control panels according to drawings and verbal instructions under consideration of Hydro codes and other applicable standards and regulations.
• Pass on information, experience and knowledge to other maintenance employee, to ensure effective, non-repetitious problem solving and machine repairs. 
• Work in a cost-effective manner and maintains a high standard of quality and excellent workmanship. 
• Conduct preventative maintenance programs and keep maintenance records. 
• Must have continuous improvements on machinery and equipment.  Meet schedule set by maintenance Manager.
• Use different PLC programming devices including software to modify and read logic control programs.  Perform other assignments from time to time as managements so directs.
• Inform the Maintenance Manager or depending on the shift, inform the
• Production Supervisor to the best of his ability about unusual things, faulty design, unsafe conditions, missing parts, etc. Adhere to standards and rules described in the Employee Handbook, conduct in a manner consistent with those practices leading to the safe operation of the division and displaying leadership, concerns and a safe work ethics.

• Perform other duties as required within his/her ability.

• Actively and positively support the continued practice of Common Values behaviours

Awareness, Unity, Empowerment:

At Magna, we believe that a diverse workforce is critical to our success. That’s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email to comply with GDPR requirements and your local Data Privacy Law.

Regular / Permanent

Magna Powertrain

Responsible for pre-tripping trailers and performing minor repairs as required.

How You’ll Help

• Pre-trip trailers in both dock doors and yard and perform minor repairs as reqired
• Work with dispatch and dock to identify trailers to be pre-tripped
• Minor repairs to trailers include but not limited to, lights, glad-hands, etc
• Operate a motor vehicle equipped for pre-tripping trailers
• Report deficiencies to maintenance manager or shift supervisor
• Other related duties as may be required.

Your Skills & Experience: 

• Post secondary education
• A suitable combination of education and experience may also be considered.
• Experience in maintenance department is considered an asset
  • Communication skills verbal and written
  • Computer skills – data entry accuracy; strong knowledge of MS Office products and web based programs; knowledge and/or experience with AS400 a strong asset.
  • Strong conflict resolution skills
  • Able to work deadlines in high transactional environment
  • Ability to champion business needs in a collaborative manner to colleagues
  • Results focused

714880 Oxford County Road # 4, Woodstock, ON, N4S 7W3, CA

As a Dock Supervisor you will be responsible for the supervision of overall dock operations, including day-to-day processes and procedures, to ensure safety and optimal dock performance. 

How You’ll Help: 

• Provide daily guidance and motivation to Dock Workers (employees and agency workers) to ensure achievement of operational objectives for the terminal. 
• Escalates issues of individual poor performance, inappropriate behavior, absenteeism, etc. to the Operations Manager.  
• Communicates monthly performance stats to the team to help measure, develop and improve operational performance. 
• Maintain policies and procedures and ensure compliance with federal and provincial transportation, safety, and employment legislation. 
• Ensure all incidents (personal injuries, transportation collisions, spills, near misses, etc.) are promptly reported, documented, an investigation is initiated and corrective/preventative measures are implemented. 
• Hold effective, weekly toolbox meetings and ensure safety issues are addressed. 
• Works with the team and others, internal and external to the terminal, to resolve roadblocks to achievement of daily operational objectives. 
• Ensure the AM schedule for the terminal is followed.  
• Works with the Operations Manager to track monthly performance stats for the dock  
• Supervise a group of Dock Workers, both employee and contractor/agency, directly and indirectly through Lead Hands. 
• Other duties related to dock operations as may be required. 

Your Skills and Experience: 

• Post-secondary education, preferably in operations, logistics, or business 
• An equivalent combination of education and experience may be considered 
• Minimum of five years' experience in the transportation industry or warehousing industry, preferably dock operations 
• Previous leadership experience and/or experience in the transportation industry are strong assets 
• Strong leadership skills specifically the ability to motivate and drive engagement to achieve objectives, facilitate conflict resolution, and to provide training 
• Advanced communication skills, particularly verbal 
• Computer skills, including the use of MS Word, Excel & Outlook, and web-based programs as well as RF scanners.  Experience using AS400, a strong asset 
• Strong interpersonal skills including customer focus 
• Results driven 
• Appropriate sense of urgency 
• Strong sense of safety; training and experience in similar safety sense environments a strong asset 
• Knowledge of industry-related equipment, including forklifts, lift jacks, trailers, etc. a strong asset 
• English, other languages an asset. 

Monday to Friday / 3:00 p.m. – 11:30 p.m.
Woodstock, ON

As a Licensed Trailer Technician at Day & Ross, you will be responsible for repairing and inspecting trailers, and be a key member of our maintenance team. You are responsible for preventative maintenance, pre-inspection maintenance, diagnostics and repairs on the company’s fleet of trailers in accordance with the applicable level of training and apprenticeship.

How You’ll Help

• Responsible for the maintenance and repair of trailers according to work orders and in keeping with level of training/apprenticeship.
• Maintaining safe shop environment (may include snow removal from the roof, de-icing, washing vehicles, sweeping, etc.
• Work independently to complete diagnostic, service, repair and maintain trailers.
• Maintain and repair trailer bodies, including miscellaneous accessories such as hub caps, decals, reflective tape, painting, etc.
• Document and update Service Supervisor/Service Manager on completion time changes, all findings, work done and potential future service requirements.
• Other duties as may be required.

Your Skills & Experience:

• Work experience in the trucking industry.
• Experience in Trailer tire repairs, brakes, suspension, lights, bodywork, etc.
• Prior Lead Hand Experience is an asset.
• Red Seal journeyperson certification is required.
• Previous experience and qualification to perform Safety inspections are required in this position,
• Physically fit and able to lift, move, reach, bend, walk, stand, grasp, balance, climb, kneel and crouch for extended period of time.
• Strong knowledge of transportation industry rules and regulations regarding transport trailers and components.
• Knowledge of and ability to use safe work practices, including safe lifting and bending, working in tight spaces, etc.
• Troubleshooting and problem-solving abilities, Strong attention to detail, good communication skills –verbal and written.

What we offer:

• Competitive compensation.
• Career growth.
• Medical & dental benefits.
• Company-matched Pension Plan
• Recognition & discount programs.
• Educational assistance 

If you’re chosen for the role, you’ll be asked to provide reference and criminal background checks before employment. You’ll only be contacted if you’re selected for an interview. 

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as other trades certificate or diploma
Experience: Candidates should have experience of 1 to less than 2 years’
Control systems: Pneumatic devices
Instrument experience: Hydraulic
Area of specialization: Troubleshooting, Programmable logic controller (PLC), Robotic equipment and systems, Couplings, Mechanical
Credentials: Industrial Mechanic (Millwright) Red Seal Endorsement, Construction Millwright Trade Certification, Industrial Mechanic (Millwright) Trade Certification

Location: 1055 Fountain Street North Cambridge, ON N3H 4R7 & Woodstock, ON N4S 7V9
Shifts: Day, Night, Shift, Overtime, Morning
Work setting: Industrial equipment and automation manufacturing, Maintenance
Supervision: Industrial mechanics

Physical Requirements:

• The candidates should be able to work in a fast-paced environment
• The candidates should be able to work with attention to detail
• The candidates should be able to work in tight deadlines
• The candidates should be willing to for overtime

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorized (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Responsibilities:

• The candidates should be able to detect and troubleshoot irregularities and malfunctions
• The candidates should be able to repair or replace defective machinery parts, fabricate parts required during overhaul, maintenance or set-up
• The candidates should be able to perform routine maintenance work on machinery, operate machining tools to fabricate parts
• The candidates should be able to read and interpret blueprints, maps, drawings and specifications, program programmable logic controllers (PLCs)
• The candidates should be able to installing machinery and equipment
• The candidates should be able to troubleshoot, maintain and repair industrial, electrical and electronic control systems and other related devices
• The candidates should be able to conduct preventive maintenance programs and keep maintenance records

Benefits:

• The candidates will get pension plan, life insurance, group insurance benefits, vision care benefits, health care plan, dental plan, and bonus

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through below mentioned details.