All jobs within 50 km around St. Albert in Maintenance & Repair

Requirements:

Languages: Candidates must have knowledge of the English Language

Education:  Candidates don’t need standard educational qualifications
Experience: Candidates don’t need experience, training will be provided

Location: 5524 125 A Ave NW Edmonton, AB T5W 1V3

Responsibilities:

• The candidates should be able to move tools, equipment and other materials
• The candidates should be able to hold stakes during surveying activities
• The candidates should be able to signal safety procedures to other workers and to the general public
• The candidates should be able to perform miscellaneous labouring activities to help tradespersons, apprentices and other workers as directed
• The candidates should be able to clean machines and immediate work areas

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply (along with your resume) through below mentioned details.

By Email:
[email protected]

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates don’t need standard educational qualification such as degree, certificate or diploma
Experience: Candidates should have experience of 1 to less than 7 months

Candidate Status:

• Canadian citizens and permanent or temporary foreign workers of Canada are eligible for this position
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to operate metal cleaning equipment to remove excess welds, rust, scale, and other materials from surfaces of metal products
• The candidates should be able to assist structural steel and platework fitters, sheet metal workers, metal machine operators, or other metal workers
• The candidates should be able to sort metal sheets and parts, scrap metal, and other materials
• The candidates should be able to grind or chip excess metal from metal products using hand tools
• The candidates should be able to polish metal products to a mirror finish

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

SALARY: $43.90 per Hour

Shift Premiums:

• $45.90 per hour for dual ticket (welder, machinist)
• Shift Premium paid as per shift worked (Afternoon additional $ 0.90 per hour and night $1.25 per hour)  
• Option of 3 days weekend shift with additional premium

SHIFT: Rotating

Rotation: Midnights, Afternoons, Days (10pm-6am, 2pm-10pm, 6am-2pm)

As a member of the Maintenance team, the Millwright/Mechanic is responsible for the routine/preventive maintenance and troubleshooting of the manufacturing equipment and building.

Schedule: Hours of work are subject to the vacation schedule, scheduling variables and will change due to operation needs.

• Weeks 01 & 02 – Monday, Tuesday, Friday & Saturday: 6:00 pm - 6:00 am

• Weeks 03 & 04 – Sunday, Wednesday & Thursday - 6:00 am - 6:00 pm

Rate: $ 45.00 / hour - Rate progression based on CBA.

How you will make contributions that matter:

• Facilitates the timely and efficient preventive and predictive maintenance on production and warehouse equipment.

• Trouble shoots and repairs equipment in breakdown situations to ensure production efficiencies are achieved.

• Provides training to plant staff as required.

• Works with other trades groups, vendors and contractors to complete project assignments as required.

• Troubleshoot and repair Sanitary process equipment (process valves, pumps) along with other rotary and conveying equipment.

• Proper documentation of work performed, parts used, time sheets and HACCP & Safety documents.

• Performance of other duties as required.

You are best suited for the role if you have the following qualifications:

• Certified Journeyman

• Excellent mechanical skills and ability to carry out general plant/ equipment maintenance.

• Food industry or high-speed packaging experience.

• Knowledge of general fabrication and welding (Non process related) would be an asset

• Demonstrate excellent trouble shooting skills and analytical skills.

• Able to work independently with minimum supervision and within an interdependent team.

• A high level of self-motivation and initiative.

• Proven proficiency and dependability in current position with a good safety record.

• Able to work in confined spaces.

• Some heavy lifting required.

• Membership in Unifor Union of Canada, Local 445 (or must join within 30 days).

We support and care for our employees and their families by providing:

• Competitive salaries

• Advantageous corporate agreements

• Full range of group insurance benefits

• Group retirement pension plan with employer contribution

• Purchase option of company stocks

• Group RRSP

• Health and wellness program in the workplace

• Assistance program for employees and their families

• Saputo products at a discounted price

We support employment equity. Saputo strives to embed diversity and inclusion in its operations and invites candidates from all horizons to join its family.

The Technician, Structures is responsible for performing sheet metal activities on various aircraft and projects undertaken at the YEG facility.

Reporting to: Senior Manager, Heavy Maintenance West.

Level: As per the GAFAE Collective Agreement

* In accordance with the GAFAE Collective Agreement 

DUTIES AND RESPONSIBILITIES:
Must be able to perform, but not be limited to, the following duties and responsibilities:

• Perform sheet metal activities on various aircraft and projects undertaken at the YEG facility;
  Responsible for having their assignment approved by the applicable Supervisor or Manager for their work;
• Assist activities carried out by the shop group;
• Responsible to be familiar with all procedures necessary to follow for the maintenance or repairs to the aircraft and equipment;
• Ensure all work carried out is properly documented in accordance with the procedures manual;
• Comply with all safety regulations at all times;
• Ensure that all items of work are listed recorded and signed out on the appropriate work cards;
• Perform work procedures, while ensuring that approved methods and materials are used in a safe, efficient and economical manner;
• Maintain a clean and safe work environment;
• Capable of working in confined spaces;
• Other duties as assigned.

SKILLS AND QUALIFICATIONS:
Include, but not limited to, the following minimum skills and qualifications:

• Transport Canada Aircraft Maintenance Engineers diploma (persons actively working towards the diploma may be eligible) with preference given to B737/ATR 42 experienced persons.
• Must be willing to travel;
• Must hold valid driver’s license;
• Must have excellent organizational skills,
• Demonstrated ability to multi-task and meet deadlines;
• Must possess superior interpersonal and communication skills for internal and external customers;
• Ability to communicate in Inuktut a definite asset;
• Ability to obtain and retain a Restricted Area Identity Card in accordance with the Airport Restricted Area Access Clearance Program regulated by Transport Canada.

Closing Date: June 20th 2024

Traffic Field Operations manufactures, installs and maintains all traffic control signs and pavement markings, and provides temporary traffic control for emergencies, construction and special events on City-wide road right of way. 

Reporting to the Maintenance Crew Leader, Traffic Field Operations, the Maintenance Repair Worker is responsible for the safe and efficient manufacturing and maintenance of traffic control material, equipment, facilities and yards for Traffic Field Operations. This position ensures that operational standards, procedures and requirements are met during the manufacturing and maintenance of permanent and temporary traffic control. Commitments to Safe, Helpful, Accountable, Integrated and Excellent, you will: 

• Perform and assist workers in the manufacturing and maintenance of aluminum sign supports and brackets, wooden barricades and a-frames
• Operate hand and power tools to perform maintenance and small repairs on electronic message and arrow board trailers
• Operate and participate in the repair of a variety of heavy and specialized equipment, including picker, bucket and paint trucks, crosswalk machines, grinders, jackhammers, generators, drills, skill saws and more
• Monitor and participate in the repair, cleaning, painting, routine tasks and general maintenance of buildings and grounds, including replacing furnace filters and repairing showers, toilets and related facilities
• Prepare material orders, check stock and keep records of all materials utilized
• Perform rough carpentry work in the construction, repair, maintenance and alteration of buildings, tables, benches, fences, scaffolds, concrete forms, signs, sheds and more
• Handle traffic control material, such as barricades, pipe, signs and paint
• Operate a truck to transport equipment and materials to and from job sites
• Interact with internal and external stakeholders, and provide customer service to the public
• Read, interpret and follow directions and plans to manufacture, install and maintain material
• Adhere to standard operating procedures and essential safety measures, including participating in Safety and Environmental Programs, participating in tailgate/safety meetings, following up on safety action items and initiatives and participating in safety and other training opportunities
• Other related duties as required

Qualifications

• Completion of Grade 10
• Valid Alberta Class 5 driver's licence (or provincial equivalent). Obtaining and maintaining a City Driver's permit is a requirement of this position
• Experience or training in building and mechanical maintenance repair work, or equivalent combination of training and experience
• Knowledge of the occupational dangers and safety precautions of the trades involved
• Knowledge of the standard methods, materials, tools and equipment used in building or mechanical trades applicable to work assignments
• Ability to understand and carry out verbal and written instructions
• Skill in the use and care of the tools required to perform the work assignments
• Physical ability to perform work assigned
• Compliance with the City of Edmonton's safety standards for Personal Protective Equipment (PPE) is a requirement for this position
• Successful candidates will be fit for a respirator, and compliance with the City of Edmonton's Code of Practice for Respiratory Protective Equipment, including medical monitoring, is a requirement of this position
• Demonstrated ability to achieve results in the context of a respectful, inclusive and service-minded style
• Demonstrate alignment with the Cultural Commitments of Safe, Helpful, Accountable, Integrated and Excellent, fostering an environment for others to do the same. For more information on the City’s Cultural Commitments, please visit edmonton.ca/our-culture
• Demonstrate the foundational competencies, key behaviours and attributes of the City’s six leadership competencies: Courage, Inclusivity, Values-Based Influencer, Collaborative Networker, Systems Thinker and Creative Innovator. For more information on the City’s leadership competencies, please visit edmonton.ca/our-culture
• Embrace the Cultural Commitments of Safe, Helpful, Accountable, Integrated and Excellent, and foster an environment that encourages others to do the same
• Applicants may be tested

The City of Edmonton is committed to inclusive, respectful and equitable workplaces that represent the communities we serve. We continuously improve our systems, policies and practices to remove barriers and ensure our employees, in all their diversity, can succeed. We value applicants with a diverse range of skills, experiences and competencies, and encourage you to apply. To learn more, see the Art of Inclusion: Our Diversity and Inclusion Framework.

The City of Edmonton strives to provide reasonable access and accommodations throughout the application and selection process. If you would like to request an accommodation at any stage of the process, please contact [email protected]. 

Up to 1 permanent full-time position

Hours of Work: 40 hours per week. Rotating shifts to provide 24 hour coverage, including evening, night work and weekend work, will be required

Salary: $33.81 (Hourly); $70,595.28 (Annually)

Talent Acquisition Consultant: AS/RA

Classification Title: Maintenance Repairman I
Posting Date: Jun 07, 2024
Closing Date: June 20, 2024 11:59:00 PM (MDT)
Number of Openings (up to): 1 - Permanent Full-time
Union: CUPE Local 30
Department: City Operations
Work Location(s): Kennedale Traffic Field Operations, 13020 - 56 St Edmonton T5A 1B7

About Us

PepsiCo’s mission is to create smiles with every sip and every bite. We are committed to bringing our beloved consumer brands to market while doing good for the planet and our communities. Our success lies in our people. We offer our employees opportunities to make a meaningful impact, gain new skills and build successful careers in a diverse and inclusive workplace. Bring your unique perspective. Bring curiosity. Bring ingenuity. Bring drive. Because what makes you unique, makes us better. 

Compensation:

• $31.54 per hour with full-time hours and overtime opportunities

 What you can expect from us:

• A working environment that puts health and safety first
• Great people and culture – proudly bring your whole self to work!
• Future opportunities. We are one of Canada’s top 10 employers of youth. Ask us more in your interview!

Responsibilities

• Perform service, preventative maintenance and installation of MEM equipment, (fountain, coolers, vendors, FCB’s, Icemakers, etc.) in trade and in shop.
• Delivery and delivery assistance of Visi/Vend equipment in the trade.
• Preparation of marketing equipment.
• Perform all service/maintenance/installation requirements to meet customers’ service requirements consistent with “Customer Connect” and “PEPSI PRO”.
• Start times may vary and must be available for limited overnight stays
• All other duties as may be required
• Affective till September 15th, 2024

Qualifications

• Grade 12 or equivalent.
• Ability to work independently.
• Demonstrated customer service experience
• Ability to effectively communicate verbally and in writing.
• Required to pass assigned “Pepsi Pro” Modules during probationary period.
• Physically capable of carrying out all required duties.

Requirements:

Languages: Candidates must have knowledge of the English Language

Education: Candidates need standard educational qualifications such as a Secondary (high) school graduation certificate or equivalent experience
Experience: Candidates should have experience of 1 to less than 2 years’

Physical Requirements:

• The candidates should be physically demanding
• The candidates should be able to work with attention to detail
• The candidates should be able to bend, crouch, and kneel for extended periods

Other Requirements:

• The candidate should be accurate, flexible, reliable, and judgmental

Candidate Status:

• Canadian citizen and permanent or temporary foreign workers of Canada are eligible for this position.
• International Candidates who don’t have a valid Canadian work permit also can apply

Responsibilities:

• The candidates should be able to clean and maintain work space
• The candidates should be able to replace front end components, body components, doors and frame and underbody components
• The candidates should be able to hammer out dents, buckles and defects using blocks and hammers
• The candidates should be able to remove damaged fenders, panels and grills and bolt or weld replacement parts into place
• The candidates should be able to repair or replace damaged windows, windshields and sunroofs
• The candidates should be able to straighten bent frames using frame and underbody pulling and anchoring equipment

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your resume) through below mentioned details.

By email
[email protected]

The Maintenance Team Leader is responsible for overseeing a team of Technicians in the delivery of preventative and corrective maintenance, routine and on-demand services for assigned facilities.  The Maintenance Team Leader is responsible for overseeing the execution of activities performed by Technicians to ensure that work is performed in accordance to established processes and practices and is in compliant with all internal and external requirements including but not limited to environmental, health and safety, fire protection.  In addition to people leadership responsibilities, the Maintenance Team Leader also performs and delivers preventative and corrective maintenance as well as routine and on-demand services.

KEY DUTIES & RESPONSIBILITIES

People Leadership

• Leads a team of individual contributors
• Assigns, prioritizes and monitors work progress
• Monitors execution of activities and performance to ensure timely completion and adherence to all requirements including but not limited to operating procedures and practices, quality, performance and contract response requirements
• Guides, coaches and trains direct reports
• Provides input for performance review

Leads the delivery of as well as performs the following:

• Oversees and monitors the activities and performance of Technicians within assigned facility.  Ensures that activities are performed in accordance to established processes as well as internal and external requirements including but not limited to environmental, health and safety, fire protection
• Oversees the proper application and execution of processes and practices to ensure achievement of and adherence to all requirements
• Oversees and performs regular facility, facility mechanical and electrical equipment and systems monitoring and inspection, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.  Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides recommendations for enhancement and repair
• Oversees and monitors assigned facility by conducting facility walkthroughs, mechanical and electrical equipment and system monitoring and inspection
• Oversees and maintains, troubleshoots and repairs mechanical and electrical building systems and equipment
• Oversees and responds to routine and on-demand service requests and performs preventative and corrective maintenance on  facility mechanical and electrical equipment and systems
• Oversees the maintenance of as well as maintains work order records within service management maintenance database.  Initiates documents to  obtain formal approval of work required
• Coordinates and assists in the implementation of preventative maintenance program.  Ensures that deficiencies are identified, recorded and escalated, and that related documentations are maintained
• Coordinates and participates in facility-related projects
• Oversees and maintains all assigned tools and arranges for repair and replacement where required.  Submits all expenditures on a timely basis
• Provides, participates and supports training, safety meetings, operational meetings, tool box talks, etc.
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered
• Other duties as assigned

Work Requirements

• Must be able to be on-call and be available to respond to emergencies
• Must be willing to wear personal protective equipment

KNOWLEDGE AND SKILLS

• 5 years of facility operations and maintenance work experience
• Previous people leadership experience, preferred
• High school diploma plus trades training and certification
• Ability to lead a team of individuals
• Highly-advanced ability to adhere to processes and practices relating to facility operations and maintenance
• Highly-advanced ability to maintain and repair building mechanical and electrical equipment and systems
• Highly-advanced building mechanical and electrical equipment and system  troubleshooting and resolution skills
• Current knowledge of fire, life, safety and building codes and standards and ability to research and apply related codes and standards
• Possesses a high level of environmental, health and safety mindset.  Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification

Licenses and/or Professional Accreditation

One or more of the following:

• Journeyman level Refrigeration license
• Journeyman level Electrical license
• Journeyman level Plumbing license
• Power Engineering 3rd Class or 4th Class
• Building Operator Certification
• Gasfitter I or II
• Systems Maintenance Administration Certification considered an asset

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organizational success!

At the City of Edmonton - City Operations, we strive to help our people achieve their professional and personal goals through an inclusive environment that values everyone’s contributions, appreciates diversity of thought, fosters growth and provides continuous opportunities for development.

Get your hands dirty as you gain exposure and work on a variety of light vehicles and equipment operated by City Departments. Be proud to serve the citizens of Edmonton and apply your diagnostic troubleshooting and technical skills. Fleet Services is looking for self-motivated Automotive Service Technicians who can provide excellent service to our clients. You’ll want to be part of our stable, safe and shift work environment – right here in Edmonton.

With a focus on the City of Edmonton’s Cultural Commitments to Safe, Helpful, Accountable, Integrated and Excellent, you will:

• Diagnose problems and recommend and perform corrective action, provide field service for down equipment as required at various City work sites
• Ensure all safety and environmental precautions are adhered to
• Use diagnostic programs to identify problems and troubleshoot fleet issues
• Perform repairs and overhauls on various components including engines, brakes, transmission, differentials, axles, hydraulic controls, pumps, compressors and electrical components
• Install and maintain vehicle mounted equipment
• Inspect and follow-up on work performed by the servicing staff to ensure adherence to quality standards and time constraints
• Inspect and test vehicles and equipment and report defects as required
• Perform mechanical brake inspections on private vehicles as requested by the client
• Complete related records and documents
• Perform preventive maintenance; check brakes, lights, doors, steering gear and general motor conditions
• Complete the required administrative procedures and forms to ensure proper recording and communication of work
• Enter work order data into Fleet Management System (M5) and check warranty related repair information
• Use Fleet Management System (M5) software to perform data entry and time entry
• Perform other related duties as required

Qualifications

• Recognized Journeyman certificate in the trade of Automotive Service Technician
• Valid Alberta Class 5 driver's Licence (or provincial equivalent); Class 3 with Air Brake endorsement is preferred
• Hire is dependent upon an Enhanced Police Information Check satisfactory to the City of Edmonton. There may be a cost associated with this requirement 
• Eligible to obtain and maintain a City Driver's permit and to be licensed by the Province of Alberta to do Commercial Vehicle Inspections (CVIP)
• Capable of competently using vehicle diagnostic computer programs
• Able to accurately enter data and information into a computer (AssetWorks M5 experience is an asset)
• Experience with and the ability to operate forklifts, overhead cranes, floor hoists and diagnostic equipment (electrical, hydraulic), etc.
• Committed to safety using occupational health and safety and environmental standards and procedures
• Capable of wearing and passing a respirator fit test
• Able to deliver service in a timely manner with challenges such as billing, materials supply and vendor support
• Experience with automotive electrical systems is an asset
• Strong problem-solving and interpersonal skills
• Able to communicate, understand, read and write in English at a level needed to meet job-related task and safety requirements
• Capable of passing a job-related physical abilities evaluation and a City medical examination
• Embrace the Cultural Commitments of Safe, Helpful, Accountable, Integrated and Excellent and foster an environment that encourages others to do the same
• Demonstrate alignment with the Cultural Commitments of Safe, Helpful, Accountable, Integrated and Excellent, fostering an environment for others to do the same. For more information on the City’s Cultural Commitments, please visit edmonton.ca/our-culture
• Demonstrate the foundational competencies, key behaviours and attributes of the City’s six leadership competencies: Courage, Inclusivity, Values-Based Influencer, Collaborative Networker, Systems Thinker and Creative Innovator. For more information on the City’s leadership competencies, please visit edmonton.ca/our-culture
• Applicants may be tested

The City of Edmonton is committed to inclusive, respectful and equitable workplaces that represent the communities we serve. We continuously improve our systems, policies and practices to remove barriers and ensure our employees, in all their diversity, can succeed. We value applicants with a diverse range of skills, experiences and competencies, and encourage you to apply. To learn more, see the Art of Inclusion: Our Diversity and Inclusion Framework here: https://bit.ly/3hd2d95.

The City of Edmonton strives to provide reasonable access and accommodations throughout the application and selection process. If you would like to request an accommodation at any stage of the process, please contact [email protected]

1 permanent  and 1 temporary full-time position for up to 11 months

Hours of Work: 40 hours per week. Shift work is required

Salary Range: $42.077(Hourly); $87,856.780 (Annually)

Talent Acquisition Consultant: PL/RA

Classification Title: Automotive Serv. Technician I
Posting Date: May 16, 2024
Closing Date: May 30, 2024 11:59:00 PM (MDT)
Number of Openings (up to): 2 - Permanent and Temporary Positions Full-time
Union: CUPE Local 30
Department: City Operations
Work Location(s): Various Locations Edmonton (City Wide)