All jobs within 50 km around Orangeville in Maintenance & Repair

Performance Expectations

• Read blueprints, drawings and specifications to determine layout of plumbing system, water supply
• Network and waste and drainage systems
• Assemble, install, repair, and maintain domestic, commercial or industrial plumbing fixtures and systems
• Locate and mark positions for pipe connections, passage holes and fixtures in walls and floors
• Cut openings in walls and floors to accommodate pipe and pipe fittings
• Measure, cut, bend and thread pipes using hand and power tools or machines
• Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment
• Test pipes for leaks using air and water pressure gauges
• Travel to job sites to complete work
• Train and oversee apprentices and labourers
• Ensure that all work is completed according to plumbing code
• Maintain and organized and clean work vehicle and work site
• Cleaning the job site after work is completed
• Answer client questions
• Complete work orders
• Work rotating on-call for emergency service
• Complete jobs independently or as part of a team, depending on the specific assignment
• Perform other duties as assigned

Credentials

• Successful completion of an Ontario Secondary School Diploma (OSSD) or equivalent, preferably in a technical program.
•  Successful completion of a current Ontario license for Journeyman Plumber 306A or Pipefitter 307A. A 307A steamfitter license is also acceptable and or Sr. Apprentices
•  Minimum of 3 years experience, or schooling
• Willing to learn on the job
• Good math and measurement skills
• Excellent manual dexterity
• Exceptional active listening and problem-solving skills
• Plumbing license (senior apprentices will also be considered)
• Gas Technician 3 (asset but not required)
• Gas Technician 2 (asset but not required)
• Backflow tester (asset but not required)

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

32 Independence Place, Guelph, Ontario, N1K 1H8, CA

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Maintenance Supervisor position will be responsible for coordinating and supervising the activities of skilled and unskilled maintenance workers ensuring proper methods and procedures are followed to maintain, repair and service equipment, buildings and facilities in compliance with building codes and safety standards. Primarily accountable for maintaining production equipment in a manner that meets organization standards and ensure minimum equipment downtime. In addition, inspect projects to ensure conformity to specifications, direct safety inspections and preventative maintenance programs. This position is responsible for maintaining stock of inventory of materials, parts and specialized tools for the maintenance function.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Manage and direct the activities of employees and equipment in maintenance department in the absence of the maintenance manager.

· Effective employee relations including handling employee complaints, obtaining help and guidance for employee's with problems.

· Conducts monthly department meetings.

· Complete performance evaluations for all maintenance employees.

· Ensure appropriate parts and supplies are available.

· Maintain and direct all PM&PD activities.

· Maintain PMX software and all related documentation.

· Arrange for quotes from contractors in conjunction with maintenance buyer.

· Oversee, mentor and direct all staff.

· Department champion to ensure all contractors have appropriate documentation in order.

· Read completed inspection forms to ensure all maintenance, repair and inspection tasks have been adequately completed by workers.

· Study assembly drawings for equipment to determine what parts are required and how they go together.

· Establish work schedules and shift priorities and appointments to accommodate emergencies and cancellations.

· Develop and monitor detailed overhaul, repair and preventative maintenance schedules for shop tools, equipment and vehicles.

· Develop and monitor operating and project budgets.

· Assume a wide variety of roles to coordinate job tasks with those of junior workers, co-workers and subcontractors.

Credentials

· Completion of secondary school or equivalent general education.

· Journeyperson trade certification in a relevant trade considered an asset.

· MMP (Maintenance Management Professional) certification considered an asset.

· Minimum five years in a maintenance machining environment and two years as a supervisor or equivalent.

· Intermediate knowledge of all applicable Microsoft and other software applications.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

· Knowledge of fire alarm system:  Sprinkler, Ontario fire code.

·Automotive manufacturing experience required.

Desired Characteristics

· Ability to prioritize tasks to maintain efficiency.

· Ability to work independently to provide professional guidance and oversight.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

What Linergy has to Offer

Inclusive Culture: Join a team that celebrates diversity and encourages collaboration. Our inclusive culture ensures that every voice is heard and respected.

Social Committee: Be a part of our exciting social committee that organizes regular activities and celebrations. From team-building events to seasonal festivities, there's always something to look forward to.

Local Vendor and Supplier Discounts: Enjoy exclusive discounts from local vendors and suppliers. We believe in supporting our community and providing extra perks to our employees.

Competitive Compensation: We recognize the hard work and dedication of our team members. That's why we offer competitive compensation packages that reflect your skills and contributions.

Comprehensive Benefits: Your well-being is important to us. We offer a comprehensive benefits package that includes health insurance, retirement plans, and more.

Career Growth Opportunities: We are committed to the growth and development of our employees. We provide ongoing training and advancement opportunities to help you reach your full potential.

Positive Work Environment: We foster a positive and inclusive work environment where everyone is valued and respected. We believe in teamwork, collaboration, and celebrating our successes together.

Cutting-Edge Technology: Linamar is at the forefront of technological advancements in our industry. Join us and you will have the unique opportunity to master both time-tested machinery and the latest in state-of-the-art equipment through our comprehensive maintenance programs.

The Level 1 – Maintenance Labourer position, under the supervision and direction of the Maintenance Supervisor assist Millwrights and Maintenance Mechanics in day to day maintenance activities.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Maintain systems to track, report, document and assist with scheduled preventative maintenance.

· Record coolant refractometer readings, top up machine oils, and record usage.

· Manage oil and coolant inventories.

· Housekeeping of storage area for fluids.

· Operate forklift and floor scrubber.

· Maintain equipment in a safe and clean manner.

· Ability to use CMMS (computerized maintenance and manufacturing system).

· Ensure compliance of maintenance instruction sheets and procedures.

· Attend maintenance daily meeting.

· Measure various physical properties using common measuring tools such as rulers, tapes, thermometers and scales.

· Evaluate condition of parts and equipment.

· Assess the safety of work environments.

Credentials

· High School Diploma or equivalent general education.

· Minimum one year experience in manufacturing.

· Able to observe warning signs, such as scan phrases and icons on caution and warning signs to identify hazards in work areas.

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

Desired Characteristics

· Perform tasks independently under direct supervision.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Level 3 – Maintenance Fully Skilled (CofQ) position, under general supervision, will be responsible for performing maintenance and repair services of facility systems such as mechanical, electrical, and building systems. In addition, duties may increase in scope as skill set becomes more developed; primary emphasis is the performance of a variety of maintenance tasks rather than a high degree of skill in any particular trade.

Powering Vehicles, Motion, Work, and Lives since 1966. 

Performance Expectations

· Establish and maintain maintenance standards and develop and recommend maintenance programs.

· Install new equipment using outside services if necessary.

· Maintain the equipment and facility through preventive/predictive maintenance program.

· Consults the work orders and personal log book for jobs to be done.

· Able to understand the amount of time that particular jobs require.

· Provide guidance in troubleshooting and repair using the most expedient and thorough methods.

· Inform appropriate personnel know of deficiency of stock parts.

· Keep equipment and facility in working condition for maximum uptime.

· Interpret and review schematic drawings of mechanical, structural, pneumatic and hydraulic systems to understand their operation and identify malfunctions.

· Use specialized measuring tools such as vernier calipers, micrometers, angle finders, feeler gauges and dial indicators.

· Evaluate condition of parts and equipment.

· Assess feasibility of designs for small modifications to equipment and machinery.

Credentials

· High School Diploma or equivalent general education.

· Certificate of qualifications or certificate in a related field or equivalent working experience (millwright preferred).

· Basic welding skill for millwright.

· Minimum two years previous related experience.

· Taken specific courses and knowledgeable in different controllers (i.e. Fanuc, Siemens).

· Fully capable of level “1” and “2” maintenance requirements.

· Fully skilled in one or more trades (CET or industrial electrician).

· Use computer-assisted design, manufacturing and machining, such as AutoCAD.

· Advanced knowledge in troubleshooting servo motors, drivers, encoders, etc.

· Able to read and understand all codes and regulations (Health and Safety, Electrical).

· Able to teach practices and procedures to co-workers, apprentices and clients.

Desired Characteristics

· Able to discuss work orders, equipment malfunctions and job task coordination with co-workers.

· Perform tasks independently under general direction.

· Able to work in a team setting when necessary to install and overhaul larger pieces of equipment and complete industrial systems.

· Maintain continuous learning by reading manuals and bulletins.

What Linamar Has To Offer

· Opportunities for career advancement.

· Community based outreach supporting both local and global initiatives and charities.

· Social committees and sports teams.

· Discounts for local vendors and events, including auto supplier discounts.

The Maintenance Supervisor position will be responsible for coordinating and supervising the activities of skilled and unskilled maintenance workers ensuring proper methods and procedures are followed to maintain, repair and service equipment, buildings and facilities in compliance with building codes and safety standards. Primarily accountable for maintaining production equipment in a manner that meets organization standards and ensure minimum equipment downtime. In addition, inspect projects to ensure conformity to specifications, direct safety inspections and preventative maintenance programs. This position is responsible for maintaining stock of inventory of materials, parts and specialized tools for the maintenance function.

Powering Vehicles, Motion, Work, and Lives since 1966.

Performance Expectations

· Manage and direct the activities of employees and equipment in maintenance department in the absence of the maintenance manager.

· Effective employee relations including handling employee complaints, obtaining help and guidance for employee's with problems.

· Conducts monthly department meetings.

· Complete performance evaluations for all maintenance employees.

· Ensure appropriate parts and supplies are available.

· Maintain and direct all PM&PD activities.

· Maintain PMX software and all related documentation.

· Arrange for quotes from contractors in conjunction with maintenance buyer.

· Oversee, mentor and direct all staff.

· Department champion to ensure all contractors have appropriate documentation in order.

· Read completed inspection forms to ensure all maintenance, repair and inspection tasks have been adequately completed by workers.

· Study assembly drawings for equipment to determine what parts are required and how they go together.

· Establish work schedules and shift priorities and appointments to accommodate emergencies and cancellations.

· Develop and monitor detailed overhaul, repair and preventative maintenance schedules for shop tools, equipment and vehicles.

· Develop and monitor operating and project budgets.

· Assume a wide variety of roles to coordinate job tasks with those of junior workers, co-workers and subcontractors.

Credentials

· Completion of secondary school or equivalent general education.

· Journeyperson trade certification in a relevant trade considered an asset.

· MMP (Maintenance Management Professional) certification considered an asset.

· Minimum five years in a maintenance machining environment and two years as a supervisor or equivalent.

· Intermediate knowledge of all applicable Microsoft and other software applications.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

· Knowledge of fire alarm system:  Sprinkler, Ontario fire code.

·Automotive manufacturing experience required.

Desired Characteristics

· Ability to prioritize tasks to maintain efficiency.

· Ability to work independently to provide professional guidance and oversight.

· Maintain continuous learning to be kept up-to-date with new technologies, new information and regulatory changes within industry.

The Maintenance Mechanic is responsible for inspecting, maintaining, and replacing filters and performing minor preventative maintenance on heating, ventilation, and air conditioning (HVAC) equipment on all client sites to maintain efficiency and mechanical integrity of HVAC units. This position is well-suited for graduates of a college or other post-secondary programs in HVAC studies. Minimum G3 Gas License required, G2 preferred.

KEY DUTIES & RESPONSIBILITIES

Essential duties and responsibilities include the following. Other duties may be assigned.

All routine maintenance and inspection regardless of size of location of the mechanical equipment being inspected or maintained, where this work is done as a periodic routine service inspection maintenance procedure by the employer, limited to:

• Filter Changing and maintenance thereof
• All oil and greasing
• All belt adjusting or replacement
• Cleaning of cooling towers, coils, evaporator and condenser tubes and water treatment
• Delivery of parts and equipment
• General housekeeping
• In the area where a problem exists with non-union competition, the assignment of Maintenance Mechanics duties may be adjusted to meet local conditions in agreement with the Local Union Business Manager
• Cleaning, repairing and routine maintenance of solar energy equipment
• Helper for service and maintenance Journeymen and Apprentices, as long as the Apprentices are fully employed

KNOWLEDGE AND SKILLS

Must possess required knowledge and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• HVAC tools, materials, and safe work practices.
• Types of air filters.

SKILLS

 Must possess required skills and be able to explain and demonstrate, with or without reasonable accommodations, that the essential functions of the job can be performed.

• Maintaining an established work schedule.
• Effectively using interpersonal and communications skills.
• Effectively using organizational and planning skills.
• Maintaining HVAC equipment.
• Maintaining confidentiality of work-related information and materials.
• Establishing and maintaining effective working relationships.
• Manage the budget within assigned department.

EDUCATION

Minimum G3 Gas fitter certification is required

Must be a member of UA787

Requirements:

Languages: Candidates must have knowledge of the English Language
Education: Candidates need standard educational qualifications such as Other trades certificate or diploma
Experience: Candidates should have experience of 3 to less than 5 years
Area of specialization: Shutdown operations and troubleshooting
Equipment and machinery experience: Automated and robotic system, electrical and electronic controls, fans and blowers, heat exchangers, hydraulic system, industrial and stationary engine, lathes and other machining tools, pneumatic system, power tools, pumps and compressors, tool grinders, welding equipment, hand tools, and forklift
Own tools/equipment: Steel-toed safety boots
Credentials: Industrial Mechanic (Millwright) Trade Certification and Industrial Mechanic (Millwright) Red Seal Endorsement 

Physical Requirements:

• The candidates should be physically fit to handle a demanding workload, capable of working under pressure
• The candidates should demonstrate attention to detail and be willing to work overtime when required
• The candidates should be able to perform bending, crouching, and kneeling tasks, stand for extended periods, and handle weights up to 23 kg (50 lbs)

Other Requirements:

• The candidates should demonstrate excellent oral and written communication skills
• The candidates should be collaborative team players

Candidate Status:

• Candidate must be a Canadian Citizen or temporary or permanent resident of Canada
• Candidate must have legal authorization (Work Permit) to work in Canada
• If Candidates are unable to fulfill above mentioned requirements, don’t apply for the position

Benefits:

• The candidates will get free parking area

How to apply:

If the position is fit for you and the basic requirements are fulfilled then you can now apply directly to the employer (along with your Resume) through the below-mentioned details

By email
[email protected]

Be prepared for the screening questions. Include answering the following questions while applying:

• Are you available for the advertised start date?
• Are you currently legally able to work in Canada?
• Do you currently reside in proximity to the advertised location?
• Do you have previous experience in this field of employment?
• Do you have the above-indicated required certifications?

Overview

POSITION SUMMARY:

The Mechanical Millwright is primarily responsible to service, maintain and test production equipment.  This position will support production by trouble shooting problems, making repairs and system improvements (optimization).

• Assembles and installs new equipment and machines and is able to make modifications to existing equipment as requested.
• Carries out preventative maintenance procedures on mechanical equipment as laid out by the manufacturer’s specifications.
• Coordinate activities of co-op students, apprentices, helpers and assigned contractors.
• Assists in developing and/or updating Preventive Maintenance procedures.
• Perform all duties in an environmentally responsible manner in accordance with the Karmax Environmental Policy Statement—3 P’s. Prevent Pollution, Preserve Natural Resources & Protect our Environment

MINIMUM JOB REQUIREMENTS:

• Grade 12 Education or GED
• Certificate of Qualification Industrial Mechanic (Millwright) 433

SKILLS AND COMPETENCIES:

• Excellent written and verbal communication skills.
• Excellent mathematical, analytical and organizational skills
• Able to perform various computer functions (Microsoft Office, Production Software)
• Able to safely operate all Material Handling Equipment (Forklift, crane, buggy) in assigned area of responsibility
• Experience in hydraulics and pneumatics
• Able to operate a variety of machine tools, i.e. tig/mig/arc welders, lathes, milling machines, hand tools, etc.

COMPENSATION PACKAGE AND PERQUISITES:

• Hourly wage of $46.61/hr
• Shift Premiums $1.00/hr extra for afternoon shift and $1.25/hr extra for night shift
• 2 Weeks Vacation after 6 months of employment, 4 Personal Paid Holidays and 2 Floater Days
• Ability to lieu 40 hours of overtime for an additional paid week off
• Comprehensive Health Benefits – Including health, dental, vision, and disability coverage to keep you feeling your best
• Company-matched retirement savings plans (RRSP)
• On-site subsidized cafeteria that is open for all three shifts

Work Location: 7540 Jane Street, Vaughan, Ontario

Educational Requirements:

Degree or Diploma in Mechanical / Electrical Engineering 

Required Knowledge: 

Good knowledge in maintenance activities in a manufacturing factory. 

Must have some experience in PM, 

Breakdown coordination activities. Knowledge of maintaining CMMS for maintenance activities.

Preventive Maintenance Program

Microsoft Office (Excel, Word, PowerPoint)

Experience:  

Trained in Mechanical Maintenance and Maintenance Coordinator

Proven experience in maintenance coordination in and industrial organization.

Job Description:

Reporting to Maintenance Supervisor, the Maintenance Technician’s responsibilities will include:

Orders and tracks parts and deliveries for all the Capexes and equipment we have

Runs PM system ready for customer or ISO audits

Runs Maintenance software  

Takes repair calls from office or other service calls, like broken door, cracked concrete patch etc. 

Read and interpret blueprints and drawings to determine breakdown issues and/or to order necessary parts.

Conduct and perform planned preventive & predictive maintenance and keep maintenance records.

Minimize production downtime by responding to production calls promptly.

Participate in spare parts control system and follow all department rules and regulations.

Support to dismantle and assemble equipment, tools and machines for repair.

Comply with all regulations relating to equipment for a manufacturing facility.

Record keeping of all maintenance of all activities on a daily basis.

Respond to shop floor requests for problem solving assistance.

Perform other duties as assigned.

To apply

please email Nancy Barrett at [email protected]