All jobs within 50 km around Waterfront Communities-The Island in Maintenance & Repair

Hourly Rate/Salary: $30.90 Per Hour 
Hours of Work: 40 
Work Location: [[custlocation]] 
Department/Division/Section: T&W/Transportation&Works Dept , T&W/Mississauga Transit , MT Maintenance 
Non-Union/Union: Transit 

A Criminal Record and Judicial Matters Check (Level 2) or Vulnerable Sector Check (Level 3) will be required of the successful candidate, at their own expense, to verify the absence of a criminal record for which a pardon has not been granted.

We thank all who apply, however, only those candidates selected for an interview will be contacted. You can also check your application status in your candidate profile online. 

All personal information is collected under the authority of the Municipal Act. 

Responsible for preventative maintenance, pre-inspection maintenance, diagnostics and repairs on the company’s fleet of trailers in accordance with the applicable level of training and apprenticeship.

How You’ll Help

• Responsible for the maintenance and repair of trailers according to work orders and in keeping with level of training/apprenticeship (see below)
• Maintaining safe shop environment (may include snow removal from the roof, de-icing, washing vehicles, sweeping, etc.
• Pre-apprentice Trailer Technicians provide support to journeypersons and to apprentices under the leadership of a journeyperson in all aspects of the maintenance and repair of trailers, including but not limited to brakes, suspension systems, surelok, tires (including psi), trailer axles, lighting systems, rear walls and doors, frame and support, chassis, lighting, wiring, hydraulics, heating & refrigeration systems.
• Apprentice Trailer Technicians, under the leadership of a journeyperson, are involved in all aspects of the repair and maintenance of trailers (see above) and may provide general direction and guidance to Pre-Apprentice Technicians. Apprentice Technicians are expected to work more independently and exercise greater judgment through the various stages of the apprenticeship, obtaining final verification of work from a Journeyperson Technician.
• Journeyperson Technicians independently repair and maintain trailers (see above) and provide general direction, guidance, mentoring and training to Pre-Apprentice and Apprentice Technicians. 
• Maintenance and repair of trailer bodies, including miscellaneous accessories such as hub caps, decals, reflective tape, painting, etc.
• Documentation of all findings and work done.
• Lead Journeyperson Technicians provide work direction for all team members and act as escalation point for complex maintenance and repairs.
• Provide guidance, mentoring and training to Pre-Apprentice and Apprentice Technicians
• Work independently to complete diagnostic, service, repair and maintain trailers.
• Maintain and repair trailer bodies, including miscellaneous accessories such as hub caps, decals, reflective tape, painting, etc.
• Document and update Service Supervisor/Service Manager on completion time changes, all findings, work done and potential future service requirements.
• Other duties as may be required.

Your Skills & Experience: 

• Post secondary training in trailer repair and/or completion of trailer technician certificate course
• Preference given to applicants with Red Seal journeyperson certification
• Additional training in tire repairs and/or refrigeration will be considered an asset 
• CVIP, an asset
• Candidates enrolled in trailer repair apprenticeship may also be considered.
• Valid Class 1 license also considered an asset
• Previous work experience in an industrial environment, preferably in the transportation industry
• Previous experience and qualification to perform Safety inspections are considered an asset in this position, 
• Ability to obtain CVIP
• Physically fit and able to lift, move, reach, bend, walk, stand, grasp, balance, climb, kneel and crouch for extended period of time
• Ability to work in tight spaces
• Strong knowledge of transportation industry rules and regulations regarding transport trailers and components
• Knowledge of and ability to use safe work practices, including safe lifting and bending, working in tight spaces, etc. 
• Troubleshooting and problem-solving abilities
• Strong attention to detail
• Ability to work both independently and as a team member
• Good communication skills –verbal and written

To apply, visit our Careers page at dayross.com.

If you’re chosen for the role, you’ll be asked to provide reference and criminal background checks before employment. You’ll only be contacted if you’re selected for an interview.

As part of Maple Leaf Food’s Maintenance team, the individual will be responsible for maintaining and servicing equipment used in the facility for the daily production of our products. Furthermore, they will ensure safe plant operations and a safe working environment for all employees.

Any MLF team member interested in being considered for this role are encouraged to apply online by March 22. Applications received beyond that date are not guaranteed consideration.

Snapshot of a Day-in-the-Life:

•Must be able to install, troubleshoot, and repair complex production equipment with minimum supervision
•Enhance equipment performance, recommending improvements and implementing.
•Must be able to troubleshoot and identify mechanical problems
•Operate production equipment and check performance as required
•Strong on PM (preventative maintenance) procedures in a 24 hour/day operation
•Ensure all job-related operations are in compliance with GMPs, HACCP, WHMIS and health & safety requirements.
•Perform other duties as assigned

What You’ll Bring:

• Must have valid Ontario Millwright license
• Must have own hand tools,
• Knowledge of plant and equipment operations,
• Ability to organize and plan daily tasks with minimal supervision
• Ability to work in a team based environment
• Knowledge of seaming machines and PLC’s a definite asset
• Good mathematical, analytical and problem solving skills
• Excellent interpersonal and communication skills
• Available for weekend overtime as production demands require

We’re a global food company with more than 13,500 team members. We operate sites in 20+ locations across Canada. We also have locations in the U.S. and Mexico, and do business in Asia.

A diverse and inclusive work environment

Championing diversity and inclusion is a critical component to advancing our collective purpose and vision and living the Maple Leaf Leadership Values. We believe in building, investing in, recognizing, and rewarding remarkable people who value an inclusive workplace, embrace all forms of diversity, and commit to including every voice in our collaborative environment. We’re so much stronger when we know we’re accepted and valued for who we are and what we each bring to the workplace.

We embrace a strong, values-based culture

Our eight Leadership Values are our north star. They guide the decisions we make for all our stakeholders: our consumers, our customers, our people, our communities, our shareholders, and the environment.

• Doing What’s Right
• Shared Value
• High Performance
• Diverse and Inclusive Teams
• Disciplined Decision Making
• Our Accountability
• Intense Curiosity
• Transparency and Humility

We thank all applicants for their interest in exploring employment opportunities with Maple Leaf Foods; however, only those selected for an interview will be contacted. Applicants may be subject to a background check and must meet the security criteria designated for the position.

Work Location: 7540 Jane Street, Vaughan, Ontario

Educational Requirements:

Degree or Diploma in Mechanical / Electrical Engineering 

Required Knowledge: 

Good knowledge in maintenance activities in a manufacturing factory. 

Must have some experience in PM, 

Breakdown coordination activities. Knowledge of maintaining CMMS for maintenance activities.

Preventive Maintenance Program

Microsoft Office (Excel, Word, PowerPoint)

Experience:  

Trained in Mechanical Maintenance and Maintenance Coordinator

Proven experience in maintenance coordination in and industrial organization.

Job Description:

Reporting to Maintenance Supervisor, the Maintenance Technician’s responsibilities will include:

Orders and tracks parts and deliveries for all the Capexes and equipment we have

Runs PM system ready for customer or ISO audits

Runs Maintenance software  

Takes repair calls from office or other service calls, like broken door, cracked concrete patch etc. 

Read and interpret blueprints and drawings to determine breakdown issues and/or to order necessary parts.

Conduct and perform planned preventive & predictive maintenance and keep maintenance records.

Minimize production downtime by responding to production calls promptly.

Participate in spare parts control system and follow all department rules and regulations.

Support to dismantle and assemble equipment, tools and machines for repair.

Comply with all regulations relating to equipment for a manufacturing facility.

Record keeping of all maintenance of all activities on a daily basis.

Respond to shop floor requests for problem solving assistance.

Perform other duties as assigned.

To apply

please email Nancy Barrett at [email protected]

PURPOSE OF THE POSITION:

You will assist with the planning, scheduling and assignment of manpower to specific jobs within the Freight Car Repair and Freight Car Inspection, ensuring that all repairs and/or servicing are performed in a safe and efficient manner, in accordance with Company, AAR and TC regulations.

POSITION ACCOUNTABILITIES:

• Conduct job briefings, end of shift briefings, safety meetings and activities, ensuring that safety rules, procedures and policies are adhered to thorough proficiency testing and safety tracking document
• Correct and document safety incidents, safety hazards/concerns, investigates for corrective actions to the various departments, involving the Health and Safety Committee in the prescribed timelines
• Support, communicate and deliver to key performance indicators.  Leads to ensure all direct reports have an understanding of the business objectives, as well as the role they are all accountable for
• Communicate and interact regularly with management within field operations to ensure Freight Car repair and train servicing is meeting the expectations of internal and external customers
• Ensure that there is the appropriate level of stock/material and is responsible for ordering within prescribed limits through the SAP system.  Supports all expenditure reduction initiatives
• Maintain communication and foster positive working relationships with local union officials. Ensures the collective agreement is understood and managed as it is written
• Support and participate in Consequence Leadership, provide employees both Positive and Constructive Feedback throughout shift
• Support and participate in continuous improvement initiatives to improve productivity and effectiveness of the operation.  Support Lean Philosophy and Principals
• Ensure Freight Car bad order repair, cycle time, dwell time, productivity and key metrics are met.  Coordinate with Field Operations to ensure over the road set-offs of bad order Freight Cars are repaired in a timely manner
• Ensure repairs and train servicing are in compliance with AAR, TC standards and Canadian Pacific policies
• Support mechanical forces at train incidents within their jurisdiction adhering to the guidelines of the Emergency Response Plan
• Communicate and interact regularly with local/external counterparts
• Work directly with employees in the shop & yard environments to establish self-managed work teams and provides guidance and support to employees to bring about the vision of an empowered and engaged workforce

POSITION REQUIREMENTS:

• Must possess a minimum of a High school diploma or mechanical trade certification
• Proficient knowledge of railway operations (road, yard, freight car, mechanical)
• Working knowledge of CPKC systems (CIM, TYES, Nexus, SAP and Wreck Estimator) is an asset
• Microsoft Outlook, Word, Power Point and Excel
• Knowledge of collective agreement/non- union policies
• Mechanical aptitude
• Must be able to work with vast array of employees and be adaptable
• Must be able to work outdoors in all weather
• Must be able to work shift work
• Ability to drill down, understand root cause and resolve complex issues

WHAT CPKC HAS TO OFFER:

• Flexible and competitive benefits package
• Competitive company pension plan
• Employee Share Purchase Plan
• Performance Incentive Program 
• Annual Fitness Subsidy

ADDITIONAL INFORMATION:

As an employer with North American presence, the possibility does exist that the location of your position may be changed based on organizational requirements. 

Medical Requirements:

Operating safely is a core foundation of CPKC. Our commitment is to protect our people, customers, communities in which we operate, the environment and our assets. We are also committed to a healthy and safe workplace. CPKC’s Alcohol and Drug Policy and Procedures (“Policy and Procedures”) support these commitments.   All new hires for a safety sensitive position will be required to complete a pre-employment medical that includes a physical, vision, hearing, alcohol, and drug audit assessment. Pre-employment qualification drug test(s) are also required. This includes candidates participating in the Trainee Program who will also be required to pass a drug test during the training process before receiving final qualification for the position. 

Fastfrate Group is looking for an experienced Forklift Mechanic at our Woodbridge, Ontario, office. The ideal candidate will have 3-5 years of experience repairing and maintaining forklifts and other heavy equipment.

• Perform routine, emergency, and preventative maintenance of forklifts.
• Interpret manufacturer’s technical manuals to perform the necessary maintenance and repairs needed.
• Troubleshoot forklift problems, including brake, electrical and hydraulic systems, and detect imperfections, potential problems, safety issues and malfunctions.
• Able to diagnose and repair mast and attachment components.
• Good working knowledge of brake systems and tire/wheel changes.
• Ability to work on LP systems
• Perform safety inspection of forklifts before being released to the work floor.
• Cleaning of equipment and other areas as required.
• Ensure the work area and methods used in carrying out job duties meet safety requirements.
• Maintain an organized and neat work area.

• 3-5 years of experience in forklift and heavy equipment repair
• Knowledge of electrical and hydraulic systems
• Ability to read and interpret technical manuals and schematics.
• Excellent problem-solving and diagnostic skills
• Ability to work independently and as part of a team.
• Good communication and interpersonal skills
• Forklift certification is a plus.

• Highly competitive compensation package
• Supportive work environment
• Well-established company backed by over 50 years of service

The General Repair Technician II is a mid entry level position, responsible for assisting other technicians, performing maintenance and repair, routine services on non-technical facility components (i.e. walls, floors, etc.). The Technician II is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance to established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility technical and non-technical component monitoring and inspection.
• Responds to routine service requests and performs preventative and corrective maintenance.
• Operates facility mechanical, electrical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered.

Administration

• Records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements.
• Receives, tracks, monitors and reports status of maintenance and repair work within service maintenance management database.  Initiates documents to obtain formal approval of work required
• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements.
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Other duties as assigned

KNOWLEDGE & SKILLS

• High school diploma or equivalent
• Minimum 3 years of facility operations and maintenance work experience
• Knowledge of processes and practices relating to facility operations and maintenance
• Ability to maintain, troubleshoot and repair non-technical facility components
• Ability to provide observations about facility conditions and deficiencies and provide suggestions for enhancement and repair
• Ability to research, learn, and gain greater proficiency in applying on-the-job—fire, life, and building codes and standards
• Possesses a strong environment, health and safety mindset. Ability to perform work in a safe manner
• Strong client-service orientation along with a high sense of urgency
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Basic knowledge and understanding of Building Automation Systems (BAS)
• Ability to read understand and interpret technical drawings and information
• Self-motivated
• Computer literacy
• Demonstrated maintenance and repair skills
• Must be able and willing to work shifts, be available for on-call/stand-by and emergency call outs as they arise
• Must be willing to wear personal protective equipment
• Must meet enhanced security clearance requirements
• Valid drivers’ license

Licenses and/or professional accreditation 

• Demonstrate an interest in obtaining a diploma or a certificate, or be in the process of obtaining one.
• Meet the requirements for a higher security clearance.
• Any one of the following are considered an asset:
  • Building Operator Certification or equivalent through an accredited institution preferred
  • Building Systems Maintenance Certificate (SMC)
  • Systems Maintenance Administrator (SMA)
  • Systems Maintenance Technician (SMT)
  • Facilities Technician Certification
  • Working towards a trade license, an asset
  • Working towards Building Environment Systems (BES) Operation Class 1

General Repair Technician III is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection.

KEY DUTIES & RESPONSIBILITIES

Troubleshooting

•    Provides observations about residential houses, mechanical and electrical equipment, and systems conditions and deficiencies and provides suggestions for enhancement and repair.

Maintenance

• Performs work in accordance with established processes and practices.
• Complies with all internal and external requirements including but not limited to environmental, health and safety, fire protection.
• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained.
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on residential equipment and other systems.
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical, and other equipment system monitoring and inspection.
• Operates facility mechanical and other systems
• Manages work order life cycle progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response, and all other requirements
• Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained.

Client Relations

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through the manner in which work is performed and services delivered.

.

Administration

• Participates in and assists with facility-related projects.
• Ensures the manner in which work is performed is in compliance with corporate and legislated policies, procedures, practices, and guidelines related to environmental, health and safety, fire protection, and any other applicable requirements. 
• Maintains all assigned tools and arranges for repair and replacement where required
• Submits all expenditures on a timely basis.
• Ability to research, learn and gain greater proficiency in applying on-the-job – fire, life, safety and building codes and standards.
• Create scopes of work for various residential repairs / renovations.  
• Other duties as assigned

EDUCATION, JOB-RELATED YEARS OF EXPERIENCE & QUALIFICATIONS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years experience in residential construction and maintenance. 
• Sound knowledge of processes and practices relating to residential maintenance
• Ability to create a quality scope or work, engage with contractors and follow up on the progress of work to completion. 
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment.
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency
• Knowledge and understanding of HVAC Systems, residential plumbing, or  water wells and septic systems.
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Hold a valid driver's license

Licenses and/or Professional Accreditation (one of the following bullet points)

• Demonstrates an interest in enrolling and completing a trades certification or license, or beginning to work towards a trades certification or license
• Must meet enhanced security clearance requirements
• Valid drivers’ license

The Technician III - Stationary is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III, Stationary is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection. 

This role will work in collaboration with all key BGIS departments to ensure full support of all activities and play a key role in our INTEGRATED approach to operating buildings.   

This is an on-site full time position located in Oakville.

Opportunities for Development:   

At BGIS we are committed to the development of our people – offering them opportunities to learn and grow into various roles.  Success in the role offers Team Members the opportunity to explore various roles – some include:  

• On Account & expanded Operational roles
• Facility Management Office roles to support accounts
• Project Management roles support projects

KEY DUTIES & RESPONSIBILITIES 

Safety Ownership and Regulatory Compliance 

• Comply with all internal and external requirements including but not limited to environmental, health and safety, fire protection and mandated by BGIS Health Safety and Environment Teams and enforced by law. 
• Take ownership of safety measures relates to building equipment, ensuring the secure operation of critical systems.

 Technical Leader and Oversight: 

• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained. 
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems. 
• Participates in and assists with facility-related projects. 
• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair. 
• Maintains all assigned tools and arranges for repair and replacement where required. 
• Assume technical leadership in maintaining and optimizing building equipment to prevent disruptions to tenant operations. 
• Ensure peak performance of critical building equipment, including HVAC, electrical, and plumbing systems, through continuous technical monitoring and maintenance supporting 24/7 operations.  

 Visibility in Sites: 

• Establish a strong technical presence at facility sites, particularly focusing on critical building equipment areas. 
• Cultivate technical relationships with on-site personnel, emphasizing the importance of equipment reliability and technical response to equipment issues. 

Inspection Management: 

• Performs work in accordance to established processes and practices. 
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical and other equipment system monitoring and inspection. 
• Execute comprehensive technical inspections of building equipment, focusing on critical systems that directly impact tenant operations. 
• Document and analyze technical findings, prioritizing equipment-related repairs and upgrades. 
• Execute and maintain a meticulous technical inspection checklist and database specific to building equipment. 

 Occupant Experience: 

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered. 
• Enhance the tenant experience by prioritizing the reliability and technical functionality of building equipment. 
• Collaborate with facility management to ensure seamless equipment operation and minimal tenant disruptions. 

 Proactive Communication and Escalation: 

• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise 
• Communicate technical information effectively, with a focus on building equipment, to internal teams and external vendors. 
• Escalate critical equipment-related issues to minimize downtime and tenant disruptions. 
• Maintain open and technical communication channels with stakeholders, emphasizing equipment status and maintenance updates. 

Work Order Management: 

• Manages work order life cycle in partnership with the Central Work Order Management Team progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements. 
• In partnership with the BGIS CMMS Team, Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained. 
• Ensures the way work is performed is following corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements. 
• Prioritize technical work orders related to building equipment to minimize business disruptions for tenants. 
• Efficiently coordinate technical assignments and oversee the timely completion of equipment-related tasks. 
• Maintain thorough records of technical work order history, including equipment-specific details and expenses. 

Financial Ownership (Including Quotes Management): 

• Submits all expenditures on a timely basis. 
• In partnership with the Maintenance Lead, FM, and Regional Director, manage the budget for building equipment maintenance, seeking cost-effective solutions to ensure tenant operations are unaffected. 
• Solicit and evaluate technical quotes for equipment repairs, maintenance, and upgrades, with a strong focus on minimizing tenant disruptions. 

Vendor Management: 

• Oversee technical vendors and contractors with specialized expertise in building equipment maintenance. 
• Hold vendors to high technical standards, emphasizing the importance of maintaining equipment integrity to prevent tenant disruptions. 

KNOWLEDGE & SKILLS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years’ experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment 
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency 
• Knowledge and understanding of Building Automation Systems (BAS)
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Knowledge and understanding of HVAC Systems

Licenses and/or Professional Accreditation (one of the following bullet points)

• Building Operator Certification or equivalent through an accredited institution required

BGIS is an equal opportunity employer, and we welcome you to apply for a position with us! If you require accommodation during the recruitment process, please contact us at askHR. Upon request for accommodation, we will consult with the applicant in question and provide, or arrange for the provision of, suitable accommodation in a manner that takes into account the applicant’s accessibility needs due to disability.

The Technician III - Stationary is responsible for operating the facility including, but not limited to mechanical other supporting systems; performing structured inspections, preventative and corrective maintenance, routine and on-demand services on facility mechanical equipment and other systems. The Technician III, Stationary is also responsible for performing work in accordance with established processes and practices and for complying with internal and external requirements including but not limited to environmental, health and safety, fire protection. 

This role will work in collaboration with all key BGIS departments to ensure full support of all activities and play a key role in our INTEGRATED approach to operating buildings.   

Opportunities for Development:   

At BGIS we are committed to the development of our people – offering them opportunities to learn and grow into various roles.  Success in the role offers Team Members the opportunity to explore various roles – some include:  

• On Account & expanded Operational roles
• Facility Management Office roles to support accounts
• Project Management roles support projects

KEY DUTIES & RESPONSIBILITIES 

Safety Ownership and Regulatory Compliance 

• Comply with all internal and external requirements including but not limited to environmental, health and safety, fire protection and mandated by BGIS Health Safety and Environment Teams and enforced by law. 
• Take ownership of safety measures relates to building equipment, ensuring the secure operation of critical systems.

 Technical Leader and Oversight: 

• Performs regular facility, mechanical and other equipment and systems monitoring inspections, preventative and corrective maintenance to ensure facility uptime objectives are met, uninterrupted client operation and asset integrity of assigned facility are maintained. 
• Responds to routine and on-demand service requests and performs preventative and corrective maintenance on facility mechanical equipment and other systems. 
• Participates in and assists with facility-related projects. 
• Provides observations about facility, facility mechanical and electrical equipment and systems conditions and deficiencies and provides suggestions for enhancement and repair. 
• Maintains all assigned tools and arranges for repair and replacement where required. 
• Assume technical leadership in maintaining and optimizing building equipment to prevent disruptions to tenant operations. 
• Ensure peak performance of critical building equipment, including HVAC, electrical, and plumbing systems, through continuous technical monitoring and maintenance supporting 24/7 operations.  

 Visibility in Sites: 

• Establish a strong technical presence at facility sites, particularly focusing on critical building equipment areas. 
• Cultivate technical relationships with on-site personnel, emphasizing the importance of equipment reliability and technical response to equipment issues. 

Inspection Management: 

• Performs work in accordance to established processes and practices. 
• Monitors assigned facility by conducting facility walkthroughs for mechanical, electrical and other equipment system monitoring and inspection. 
• Execute comprehensive technical inspections of building equipment, focusing on critical systems that directly impact tenant operations. 
• Document and analyze technical findings, prioritizing equipment-related repairs and upgrades. 
• Execute and maintain a meticulous technical inspection checklist and database specific to building equipment. 

 Occupant Experience: 

• Assists in enhancing tenant and customer satisfaction and maintaining positive relations through manner in which work is performed and services delivered. 
• Enhance the tenant experience by prioritizing the reliability and technical functionality of building equipment. 
• Collaborate with facility management to ensure seamless equipment operation and minimal tenant disruptions. 

 Proactive Communication and Escalation: 

• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise 
• Communicate technical information effectively, with a focus on building equipment, to internal teams and external vendors. 
• Escalate critical equipment-related issues to minimize downtime and tenant disruptions. 
• Maintain open and technical communication channels with stakeholders, emphasizing equipment status and maintenance updates. 

Work Order Management: 

• Manages work order life cycle in partnership with the Central Work Order Management Team progressing the work form dispatched through to completion and records resolution data within service maintenance management database. Ensures work completed meets quality, contract response and all other requirements. 
• In partnership with the BGIS CMMS Team, Assists in the implementation of preventative maintenance (PM) program. Ensures that deficiencies are identified, recorded and escalated, and that related documents are maintained. 
• Ensures the way work is performed is following corporate and legislated policies, procedures, practices and guidelines related to environmental, health and safety, fire protection and any other applicable requirements. 
• Prioritize technical work orders related to building equipment to minimize business disruptions for tenants. 
• Efficiently coordinate technical assignments and oversee the timely completion of equipment-related tasks. 
• Maintain thorough records of technical work order history, including equipment-specific details and expenses. 

Financial Ownership (Including Quotes Management): 

• Submits all expenditures on a timely basis. 
• In partnership with the Maintenance Lead, FM, and Regional Director, manage the budget for building equipment maintenance, seeking cost-effective solutions to ensure tenant operations are unaffected. 
• Solicit and evaluate technical quotes for equipment repairs, maintenance, and upgrades, with a strong focus on minimizing tenant disruptions. 

Vendor Management: 

• Oversee technical vendors and contractors with specialized expertise in building equipment maintenance. 
• Hold vendors to high technical standards, emphasizing the importance of maintaining equipment integrity to prevent tenant disruptions. 

KNOWLEDGE & SKILLS

• High school diploma plus trades training and/or certification or licensing.
• Minimum 3 years’ experience providing preventive and corrective maintenance on heating ventilation and air conditions systems, or pneumatic or hydraulic systems.
• Sound knowledge of processes and practices relating to facility operations and maintenance
• Demonstrated ability to maintain, troubleshoot and repair (as per applicable qualifications) mechanical and other building systems and equipment 
• Possesses a strong environmental, health, and safety mindset.
• Strong client-service orientation along with a high sense of urgency 
• Knowledge and understanding of Building Automation Systems (BAS)
• Effective communication skills for the purpose of data relay, exchange, feedback, and clarification
• Mentoring skills required to support lower level technician’s development
• Must be able and willing to work shifts, be available for on-call/standby and emergency call-outs as they arise
• Must strictly adhere to Health and Safety policies including wearing required Personal Protective Equipment (PPE)
• Must be capable of obtaining appropriate security clearance
• Knowledge and understanding of HVAC Systems

Licenses and/or Professional Accreditation (one of the following bullet points)

• Building Operator Certification or equivalent through an accredited institution required